 |
1 |
2023 John Deere X9 1000, PIN: 1H0X910XEPA825183. Engine hours: 1669, separator hours: 1157.5. Ultimate Cab Package, Ultimate Suspension Package, Ultimate Visibility Package Gen 4 4600 Command Centre, engine upgraded to 1100 specs, StarFire 7000 Integrated Receiver with SF1, JDLink Modem. Features chopper with powercast spreader, Fore Aft Tilt - 3.50 In. (90 mm) Lift Cylinders, X Series Dual Separator , small, large and round concaves, Extended Wear Grain Handling System, rear towbar hitch, power fold grain lid., 31 Ft. (9.4M) Power Folding unloading auger, Adjustable Auger Spout, Tracks Complete Combine with 30 inch track belt at 3m spacings, tracks replaced 100 hours ago, Powered Rear Axle, 2-Speed 4-wheel drive. Includes 40’ HD40R Front S/N: 1H0HD40RCN0825010, top cross auger and finger-tyne reels, on a Corcoran Steel Fabrication stump jump trailer SN: COR712340. Yearly pre-season checks and repairs carried out. Well-maintained, low-hour machine in very good condition. Sold as a unit. Located Hay, NSW.
|
SOLD |
$697000
|
 |
2 |
2020 John Deere S780, PIN: 1Z0S780ATLF125235. purchased new in 2021. Engine hours: 3152, Roto hours: 2248.8. Gen 4 4600 CommandCente, Powered Rear Axle, 2-Speed 4 wheel drive, combine advisor package, tough rice package, extended wear grain handling system, small, large and round concaves, LED Lighting package & header extremity lights, power fold grain lid,, 26 Ft. (7.9M) unloading auger, Premium Residue - In-cab operator controlled Advanced PowerCast powered tailboard with Wind powered tailboard with wind compensation, 6.5 In. (165mm) Axle Spacer 3m wheel spacings. Also includes John Deere 740D 40’ Draper cutting platform hydrafloat front. SN: 1H00740DKN0820153. Cross top auger, finger tyne reels. Cororan Steel Fabrication stump jump trailer (no identifiers sighted). Yearly pre-season checks and repairs carried out. Well maintained machine sold as a unit. Located Hay, NSW.
|
REFERRED |
$240500
|
 |
3 |
2021 John Deere S780, PIN: 1Z0S780ACLF125220. Engine hours: 2,921.9; separator hours: 2,114.3, 4WD rice spec combine, chopper with powercast spreader, small, large, and round concaves, 3m wheel spacings, power fold grain lid, rear towbar hitch. Also included is a John Deere 740D 40' draper cutting platform, SN: 1H00740DLN0820161. Top cross auger, finger tyne reels and an MD Steel Fabrication Trailer SN: 4460. Well-maintained machine. Annual pre-season checks and repairs carried out. No guidance supplied, Sold as a unit. Located Hay, NSW.
|
REFERRED |
$212000
|
 |
4 |
2013 John Deere S680 - STS, PIN: 1H0S680SHD0756592. Engine hours: 4485.3. Rotor hours: 3343.9. Wheel spacings at 3m, power fold grain lid, rear towbar hitch. Also included is a John Deere 640D 40' draper front SN: 1H00640DKGR785146. Top cross auger, finger tyne reels and a MD Custom made Trailer (no identifiers sighted). Well-maintained machine. Annual pre-season checks and repairs carried out. No guidance supplied, Sold as a unit. Located Hay, NSW.
|
REFERRED |
$78500
|
 |
5 |
2012 JOHN DEERE S680 PIN:1H0S680SCC0746525 Front pin:1H00640DACR745648 Engine hours: 4364.7 Rotor Hours 3190.1. Starfire 3000 GPS. Powercast chopper, premium cab, autotrac ready, harvest monitor, HID lights, side hill proformance package, 7.9m auger, Tristream rotor XTD, supporting documents for maintenance, havestaire sieve as a spare and OEM sieve fitted on duals 520/85R42, rear steer wheels 620/75R26, power fold grain tank lid will come harvest ready. John deere 640D Draper front with custom made end cover by Beulah machinery, mats in good condition, comes with Beulah machinery single bogie comb trailer. also comes with 2011 Atlas Copco XAS 130 air compressor S/N: APP157128 with hose and wand. Property sold. Located West Wyalong, NSW.
|
REFERRED |
$71500
|
 |
6 |
CIRCA 2006 JOHN DEERE 9750 STS H09750S686394.with 36ft John Deere drapier front Serial no. H00936686639. showing 6293 engine hours and 4473 threshing hours, vendor states this has had a replacement engine with hours very similar hours at time our installation, and replaced the engine coupling approx 500hr ago. 3 range hydrostatic drive, new batteries, will need pre-season completed, 36 Ft drapier front comes with a coolamon steelworks single bogie trailer with rubber block suspension, the Reel arm is broken and will be replaced, there is a spare parts unit with front (9650sts) that will be included in the sale, located Coonamble, NSW.
|
REFERRED |
$18000
|
 |
7 |
2009 JOHN DEERE 9770 HEADER. PIN. H09770S732870. Engine no. RG6090L064422. One owner machine, always shedded, presenting in excellent condition, with full service history from new. Just had pre-season completed and is crop ready. 4024 engine hours and 2992 threshing hours. Greenstar autosteer ready, no receiver or display included. Can take a Gen 5 display. 45ft auger extension that is only 3 years old. Michel's grain bin cover with electric roll over tarp. 3 speed manual gearbox. Power harness and switch for Macdon titlt. Kondex concave in number 1, medium wire in number 2 and 3. Straw chopper. Was purchased with all extended wear components. Please see attached full service history from new. Front tyres 800/70R38 and rear tyres 400/85R26. Everything that needs doing on this machine has been done from new. Please note the panel on the off side of the machine is a replacement panel and the 9860 STS sticker does not relfect the model of the machine. Located Collie, NSW
|
SOLD |
$76500
|
 |
8 |
2005 JOHN DEERE 9660 STS PIN: HO9660S711770 Front S/N: H00936D711198. Engine hours: 3909. Rotor Hours: 2957. used machine was pre-seasoned and parked as a spare unit after upgrading, surplus requirements,Vendor has service records and maintenance history since purchase (one owner machine) 936D Front, single knife drive, double cut knife sections, Inverell welding & engineering trailer with single front axle and dual rear axle. both units always stored undercover after use, guards removed for storage. Located Tullibigeal, NSW.
|
REFERRED |
$65000
|
 |
9 |
2004 JOHN DEERE 9760 STS. Serial no. HO9760S707080. Engine hours 3634. Threshing hours 2532. Current vendor only the 2nd vendor. 2600 display included, no receiver. New top sieves last harvest. Bottom sieves done 2 seasons ago. Will be sold with a pre season by Bowen Heavy Ag Inverell. 2 x brand new batteries. Supplied with owners manual. Including front and trailer. Supplied with spare centre mat and convaves in photos. Rear tyres 28L-26 and front tyres 520/85R42. This lot also includes the John Deere 936D front with serial no. H00936D725580. 36ft front with upgraded Conquest top cross auger only two seasons ago. All new rollers, new drive uni, knife drive gearbox just been rebuilt. Spare knife. Also supplied with the Coolamon comb trailer. Located Yallaroi, NSW
|
REFERRED |
$57000
|
 |
10 |
JOHN DEERE 9650 STS + 936D FRONT + TRAILER. 5627 engine hours and 4089 seperator hours. 4wd. Greenstar GPS display. GPS auto steer. Auger extension. Located Coolabah, NSW
|
REFERRED |
$17000
|
 |
11 |
JOHN DEERE 8820 + 2 X FRONTS. Hours 5498. Located Coolabah, NSW
|
REFERRED |
$5000
|
 |
12 |
2005 John Deere 9650CWS, PIN: H096500W686250. Engine hours: 6123, Rotor hours: 4347. Straw walkers. 3 speed hydrostatic drive, John Deere 925D 25’ Platform Draper Front SN: H00925D710808. Custom made trailer single front axle, bogie rear axles. Annual pre-season checks and repairs carried out. Sold as a unit. Located Hay, NSW.
|
REFERRED |
$15500
|
 |
13 |
2011 CASE 7088 PIN: YBG006522. Diesel powered Cummins Engine, Rear tyres 540/65R30 fitted 50 Hectares of use as new. front tyres 900/60R32, Pro 600 control monitor. LED lighting package, vendor state that the auger unloading gearbox has been rebuilt last preseason - front cone in rotor has been replaced, has been a very reliable header for the vendor and is only selling as this is now surplus needs. Located Young, NSW.
|
REFERRED |
$33500
|
 |
14 |
2014 CASE IH 8230 Serial no. YEG224653. Engine hours 5027 and threshing hours 3673. Straw chopper. Will have pre season completed by Maitland Harvest & Mechanical. Supplied with Case IH 2014 Case IH 3152 45ft front with serial no. YEH040438 and Stump Jump comb trailer. Please see the last four photos which show the works completed on both the header and front since 2022 and the 2026 pre season works thats will be completed prior to auction. Located Moree, NSW
|
REFERRED |
$127000
|
 |
15 |
2011 CASE 8120 & 2152 FRONT PIN: YBG212664. PIN: YBZN08106. Engine Hours: 5071 seperator hours: 3677 fitted with cameras UHF am/fm radio, A/C cab 900/60-32 single fron tyres 600/65R28 rear steer tyres, folding grain top. 2152 Front, 5-bat 2 piece pickup reel, with quad axle leith trailer, with dual tool boxes and parts rack. Located Barooga,NSW, Front located at Weethalle NSW.
|
REFERRED |
$56000
|
 |
16 |
2021 CASE 8250 AFS PIN:HAJF8R2KAMG243666 WITH MACDON 45' FRONT Serial no. 398492-21,12.9L FPT Engine, ENGINE HOURS 1972. THRESHING HOURS 1406.Trimble centre point unlock, with a/c cab remote mount UHF, cameras 40mm tow hitch. Hydrostatic power shift transmission, 410 Bushell/14,400L Grain Tank Capacity, Pivoting Spout folding auger, with dual 580/85R42 front tyres and 600/70R28 rear, 45 ' MACDON front on O'Connor quad axle trailer, vendor has maintenance history major servicing that has been carried out, vendor states Engine oil will be required to be changed for harvest ready. Located Tullamore, NSW.
|
REFERRED |
$375500
|
 |
17 |
The 2008 New Holland CR9070 header has logged 4,546.59 engine hours and 3,488.17 rotor hours. It comes equipped with an upgraded lighting system and three flashing beacons. Three years ago, the rotor, sieves, and walkers were reconditioned, and both stub axles were replaced at that time. Additional features include a UHF radio, two fire extinguishers, and a bottom-filled auxiliary water tank. Please note that the E2-steer unit and auto steer will be removed before the sale, as guidance equipment is not included with this header. Also the float module depicted is not included in sale but is being auctioned in a separate lot. This machine is clean and has been well maintained. Located Grenfell, NSW.
|
REFERRED |
$15000
|
 |
18 |
2006 NEW HOLLAND CR970 HAJ103513 HARVEST With Honeybee front Serial no: 42GB081528 Engine hours:6069 separator hour: 4501 Front comes with custom Quad axle comb trailer, Header stored in shed in the off season. Located Echuca, VIC.C.
|
REFERRED |
$20500
|
 |
19 |
2006 NEW HOLLAND CR960 HAJ101300, WITH HONEYBEE 36FT FRONT Serial no. B11 43 6000080,Trimble ezy steer guidance, uhf, Vendor states that the rotor drive has been rebuilt ($21K) 2024and the hydraulic pump rebuilt 2020, approx. 700 hours single bogie custom trailer, machine will need preseason. Located Coonamble, NSW.
|
REFERRED |
$40250
|
 |
20 |
2000 NEW HOLLAND TR99. Serial no. 564969. Front tyres 30.5L-32. Rear tyres 16.9-26. Engine hours 5764. Approx 4000 threshing hours. Last used two seasons ago. Also supplied with 30ft front. Working condition, will require a pre-season. Located Billa Billa, QLD.
|
REFERRED |
$3500
|
 |
21 |
1998 TR9-8 New Holland Header and Honey Bee 94C front. Serial number: 564310. Engine hrs: 3,996.6. Threshing hours: 2,747.4. Calc-An-Acre meter. Rear chaff spreaders. Air-conditioned cab (not operating). Tow hitch. New front tyre, 800/65 R32, fitted 2025. Original operation manuals. Sold with 30’ Honey Bee 94C front. Serial number: B 08430016720. Finger tine reels, retractable draper belt for windrowing. G&B Welding trailer. Front single axle, rear bogie axle. Unit used 2025 harvest season and will need harvest pre-season service. Located Tallimba, NSW. Please Contact Peter on 0409 396 605 for collection
|
REFERRED |
$10750
|
 |
22 |
2005 CAT LEXION 470R HEADER + MACDON 973 FRONT. One owner combination from new. Always shedded when not in use. Header serial no. COL00470L76500913. Engine hours 5706 and separator hours 3782. C9 Caterpillar engine. A replacement door has been ordered and will be fitted prior to delivery. Macdon front is 36ft. Draper front. Stump Jump trailer included. Located Gunnedah, NSW
|
REFERRED |
$15750
|
 |
23 |
CIRCA 2012 MASSEY FERUGSON 9540 AGCM95400CHC17189. Combine with new holland front on a bogie single trailer. Engine hours- 2130 Separator hours - 1594. With top con display Auto greaser, electric folding grain top, duals wheels 620/70R42 on the front single steers 480/80R26 at the rear Low hour Machine, combine stored in shed during off season, Located Echuca VIC
|
REFERRED |
$21000
|
 |
24 |
2023 MacDon FM100, serial #466683-23, near new with just 500 hectares of use, fits New Holland header. Ready for harvest. Please note that the header depicted is being auctioned separately. Location: Grenfell, NSW.
|
REFERRED |
$31500
|
 |
25 |
2024 NEW HOLLAND TD95D 90HP PIN: HFC208306 engine No# 665641
. 4wd capabilities Dual PTO speed 3PL. A/C cabin, UHF, Am/FM Radio, front weight package,3 mechanical activated hydraulic remotes, Hydraulic pump capacity 51.7L/min, 20x12 + creeper gear, draw bar. Low hour machine, all tyres are 230/95R44. Located Whitton, NSW.
|
REFERRED |
$25750
|
 |
26 |
2024 NEW HOLLAND TD95D 90HP PIN: HFD208303 engine No# 665649. 4wd capabilities Dual PTO speed 3PL. A/C cabin, UHF, Am/FM Radio, front weight package,3 mechanical activated hydraulic remotes, Hydraulic pump capacity 51.7L/min ,20x12 + creeper gear draw bar. Low hour machine, all tyres are 230/95R44. Located Whitton, NSW.
|
REFERRED |
$25750
|
 |
27 |
2022 NEW HOLLAND T7.270 FWA TRACTOR, VIN: HACT7270AMD422481 * P/N: 51671650 * Hours: 475.6 * 6.7 litre engine at 240 HP * CVT Auto Command transmission * 50 kph capability * Terraglide front axle and cab suspension * Quad hydraulics with return line * 3 three-point linkage * Front hitch * LED lighting * Wheel spacing: 2.15m * Overall dimensions: 4.9m L x 2.8m W * CNH 372 receiver * IntelliView screen * Guidance system unlocked to RTX ...No subscription * Tidy low hour tractor. No further use as farm is leased. Located Tallimba, NSW.
|
REFERRED |
$166000
|
 |
28 |
2015 CASE IH 290 MAGNUM. Serial no. ZCRD02993. Hours showing 7398. 4 x hydraulic remotes. PTO. 3PL. Comes with quick hitch. Right hand rear axle has been rebuilt, New Pro 700 and Nav controller included and unlocked for Task Control. New fan drive shaft, new viscous fan hub. Transmission accumulators have been re-gassed. Arm rest console has been renewed. New fuel guage and remote pilot heads. 19 speed Powershift with 40km/hr transmission. 3 metres centres. Front tyres 480/70R34 and rear tyres duals 480/80R50. Tinted windows. Batterty isolator. Located Moree, NSW
.
|
REFERRED |
$89500
|
 |
29 |
Serial no. AGCC0765CENC01118. PTO. Quick hitch. 5 remotes. Front weight pack. Idler weights. Trimble 750 display. Centrepoint GPS with 12 months subscription. Tracks will need replacing. Located Narromine, NSW
|
REFERRED |
$81500
|
 |
30 |
2020 KUBOTA M5101N 105HP WITH ORCHARD CAGE, PIN: KBUM2EDCJL8M50272. 4-cylinder Kubota diesel with 706.4 genuine hours, synchronized 3 range transmission, 4WD capabilities, CAT 2 - 3PL ,3 rear hydraulic remotes with needle valve flow control & extension for front connection. Located Griffith/Yenda, NSW.
|
REFERRED |
$18500
|
 |
31 |
1956 Massey Harris Ferguson TEF 20, Serial Number: TEF 515925. 4 Cylinder diesel engine, 3PL, ROPS. Runs but engine is smoky, undiagnosed issue. Located Wilcannia, NSW.
|
REFERRED |
$1100
|
 |
32 |
CHAMBERLAIN C670. Front grader blade. PTO. 3PL. Evaporrative Air conditioner. Front tyres 9.00/16 and rear tyres 18.4-30.0 rear tyres. Working condition. Battery isolator. Slasher not included. Located Nyngan, NSW
|
SOLD |
$5900
|
 |
33 |
2019 MASSEY FERGUSON WR9960 AGCOM99600LHS12185. 1969 hours. Only the 2nd owner. 16.5L rear tyres and 620/75R26 front tyres. Main pick up beam replaced 100 hours ago. Supplied with Massey Fergusson 5300D Dyna Swath front 30ft pick up front sitting on the Stump Jump trailer. Spares included - sensor for steering ram, switch panel for lights and new cable for GPS. Front serial no. AGCM53300HHDW2169. Located Trangie, NSW
|
REFERRED |
$107500
|
 |
34 |
1998 MACDON 9300 WINDROWER Serial No: 120759 + 25ft Case draper front + Custom carrier for Prime mover. 7177.5 hours. 4-cylinder Cummins turbo diesel engine with new water pump. Brand new draper belt on the 25ft Case IH Front. Deck shift. Air-conditioned cab. Wiring and pod for Trimble 750 screen. AG-25 receiver and EZ-Steer controller included. Comes with custom carrier for back of a Prime mover (turntable not included). Located Goolma, NSW
|
REFERRED |
$10500
|
 |
35 |
2012 MANITOU MHT-X 860L. Serial no. 761501. 4237 hours. UHF. E stops. FOPS. ROPS. Reverse camera. Auto greaser. Isolators. Located Walgett, NSW
|
REFERRED |
$63000
|
 |
36 |
2023 NEW HOLLAND VARIFEED 12.5 on bogie bogie comb trailer. Pin: 888260014. Dual knife drives and side cutters working cut width 12.5m. knife travel up to 575mm, feed auger 660mm approximate weight 4400kg. Trailer measures 19.4m overall, and 18.9m eye center to rear. Inspections welcome by appointment. Located Pucwan, NSW.
|
REFERRED |
$35000
|
 |
37 |
2018 MACDON D140 DRAPER FRONT, serial no. 328447-18. 40-foot front fitted with finger tine reel. New stainless steel skid plates fitted, with feed deck skid shoes replaced within the last 200 hours. Gauge wheel pins and bushes, RTD drive chain, left-hand draper wobble box in and out seals have all been replaced. The float lock has been repaired and a new float spring fitted. Belts are in good condition. Unit has just had the 2026 pre season service completed at the cost of $10k with receipt. Well maintained front. Note: Comb trailer and contents are not included in the sale. The comb trailer will be heading north to Queensland, and delivery in that direction may be an option. Located Temora, NSW.
|
REFERRED |
$62500
|
 |
38 |
2023 JOHN DEERE HD40R FRONT + TRAILER. Serial. 1HOHD40RPP0825104. One owner. Crop ready, with the following works completed - reaplced knife head bearings, end reel bushes replaced, any worn retractable fingers and bushes replaced, draper matt drive pump resealed, replaced key ways in reel drive motor. Approx. 1000 hours of use. Adaptor can go on both X9 and 2021 model onwards S780 machines. Supplied with 2010 Inverell Welding comb trailer. 2 x new axles, rims and three last season. Plesse note the trailer under the front in this lot is not included. Located Goondiwindi, QLD
|
REFERRED |
$96000
|
 |
39 |
2023 JOHN DEERE HD40R FRONT + TRAILER. Serial no. 1HOHD40RKP0825105. One owner from new. Crop ready, with the following works completed - reaplced knife head bearings, end reel bushes replaced, any worn retractable fingers and bushes replaced, draper matt drive pump resealed, replaced key ways in reel drive motor. Approx. 1000 hours of use. Adaptor can go on both X9 and 2021 model onwards S780 machines. . Supplied with circa 2024 GMW Welding comb trailer. Electric trailer brakes. Located Goondiwindi, QLD
|
REFERRED |
$101000
|
 |
40 |
2020 JOHN DEERE 740FD WITH TRAILER. 1H0740FDJL0810468 WONGAN ENGINEERING Bogie single trailer, Pallet of new spare included, MORE INFORMATION TO COME. Located Echuca, VIC.
|
REFERRED |
$14250
|
 |
41 |
CIRCA 2008 MIDWEST 0H00TF SERIAL NUMBER: MWF-08080339 with trailer. nSerial no. 08090142. drum replaced and only done approx 60 hectares matts have done approx 1 season, pallet of spares as seen in photos, trailer is a midwest single bogie axle on leaf spring suspension, with changable tow hitch.reason for sale surplus needs, Located Trangie, NSW.
|
REFERRED |
$10250
|
 |
42 |
2018 MACDON D1 45’ DRAPER FRONT, Serial number: 328605-18. MacDon 45’ front with finger tyne reel, full preharvest service just completed at cost $10k. New knife and full set of knife guards. New centre mat and all roller bearings replaced. Front is harvest ready. Included in sale Cleverdons Steel Construction dual bogie trailer. Please note: Header items shown in trailer photos are not included in sale. Located Temora NSW.
|
REFERRED |
$100500
|
 |
43 |
2016 NEW HOLLAND 840CD-40 DRAPER FRONT. Serial no. YGH042637. Top cross auger. Finger reel. Located Walgett, NSW
|
REFERRED |
$6250
|
 |
44 |
2023 MACDON PW8 PICK UP FRONT, Serial number: 458139-23. Width 14'8", overall width17'5". Good condition only used for 2 seasons and pre harvest service completed. Located, Quandialla, NSW.
|
REFERRED |
$30000
|
 |
45 |
2022 KNUCKEY SB 163 FLO THRU PICK UP FRONT. Serial no. 1084. 16 foot. To suit CNH headers. Located Walgett, NSW
|
REFERRED |
$35500
|
 |
46 |
2022 KNUCKEY SB163 FLO THRU PICK UP FRONT. Serial no. 1090. 16 foot. To suit CNH headers. Located Walgett, NSW
|
REFERRED |
$38750
|
 |
47 |
SMALE 12' PICK UP FRONT. Serial no. CF1202. Suits John Deere 9760. Hydraulic drive top feeder auger. Supplied with upgraded main auger drive kit, not fitted. Bogie trailer. Vendor states harvest ready. Located Narromine, NSW
|
REFERRED |
$13000
|
 |
48 |
2008 CASE SWATHMASTER 2015 14FT M15 BC PIN: V8ZV0080. with trailer. Belt width 13ft 3.69m, over all width 15'10'' 4.82M Located Moama,NSW.
|
REFERRED |
$13750
|
 |
49 |
CUSTOM QUAD AXLE COMB TRAILER was used for 42FT Honeybee front no longer required, rubber block suspension, Electrid brakes, Located Coonamble, NSW.
|
SOLD |
$11600
|
 |
50 |
2025 BROMAR MBT 175 MOTHERBIN. Excellent condition. Only one season old. Roller over tarps. 175 tonne capacity. 16 inch discharge auger. Hydraulic spout. Located Walgett, NSW
|
REFERRED |
$198500
|
 |
51 |
2024 COOLAMON CB4524 CHASER BIN. Serial no. 452456. Bin number 3. 45 tonne capacity. 24 inch discharge auger. Hydraulic spout. LED work lights. 800/65-32 tyres. Roll over tarp. Hydraulic rear steer. Hydraulic jack. 3.8 metre transport width. Located Walgett, NSW
|
REFERRED |
$170000
|
 |
52 |
2024 COOLAMON CB4524 CHASER BIN. Serial no. 452458. Bin number 2. 45 tonne capacity. 24 inch discharge auger. Hydraulic spout. LED work lights. 800/65-32 tyres. Roll over tarp. Hydraulic rear steer. Hydraulic jack. 3.8 metre transport width. Located Walgett, NSW
|
REFERRED |
$171000
|
 |
53 |
2024 COOLAMON CB3624 36T CHASER BIN. SERIAL NUMBER: 362470 With rear steering, weight scales, 24" unload auger, roll over tarp, cameras. hydraulic jack leg, Submarine door at rear for access, 1000 pto shaft, hydraulic adjusting kicker, internal shut off doors, hydraulic folding auger, 2" sample port (ball valve). ADR stub axle with walking beam suspension, presents in great condition, Located Echuca, VIC. MORE PHOTOS TO COME.
|
REFERRED |
$151500
|
 |
54 |
2017 COOLAMON STEELWORKS FB10020 Mother Bin, Serial number: 1001706, 100 tonne capacity, PTO drive, hydraulic lift, scales fitted, submarine door, split ROT tarps. Located Quandialla, NSW.
|
REFERRED |
$116000
|
 |
55 |
1980 FOUR FARMERS 45T FIELD BIN. PTO drive. Hydraulic fold discharge auger. 8 inch auger. Roll over Tarp. 3.2m transport width. Located Narromine, NSW
|
SOLD |
$20250
|
 |
56 |
03 FINCH B22-202 22T chaser bin, fitted with fire fighter tank, hydraulic driven water pump, hose reel. spray nozzle left hand side, Hydraulic folding auger which has had repairs, 1000 rpm PTO Camera's fitted. walking beam suspension, roll over tarp, internal hydraulic grain doors, dual alxle with 30.5L-32 tyres, site glasses. Located Echuca, VIC
|
SOLD |
$46250
|
 |
57 |
BORDIGNON APPROX 8 T CHASER BIN, No identifiers located. 540 PTO unloading auger, Hydraulic driven cross auger, hydraulic folding auger, custom grain to fitted to fit roll over tarp. hold approximately 8T Located Tallimba, NSW.
|
SOLD |
$8300
|
 |
58 |
2023 SUPABIN, CLEAR RIDGE FABRICATIONS 22,000 LITRE GROUPER/SUPER BIN FITTED TO A 2004 RETRACTABLE A SKELL TRAILER
.Three separate compartments and rear delivery. Anderson plug to battery pack for remote control operation. Electric actuator operated bin doors. LED work lights. Roll over tarp. Dual purpose as vendor has used this unit at harvest time for grain delivery. L 6 m, W 2.475m, H 2.3 m. SupaBin is fitted to a 2004 retractable Kruger A Skell trailer. Truck hydraulics connected with return line and original 12 V power pack (not used currently) fitted for retraction. Anderson plug connection at front. RFS axles and airbag suspension, spider rims, holland turntable, suspension air gauge. Measurements 12.4 m, overall 2.4 m wide. Pin to front 1.5 m, pin to pin 8.63 m. Very versatile unit used as a seed grouper then bulk bin for harvest. has had brakes done and very few kilometres since. New VIN plate from Kruger will be supplied as old plate is missing. Vin number is stamped in chassis. Trailer has previously been registered in New South Wales. Sold unregistered as per T&Cs. Located Alleena, NSW.
|
REFERRED |
$55000
|
 |
59 |
2022 NEW HOLLAND BIGBALER 1290 HIGH DENSITY PIN: HAF43Y68LN4259007. 6 string, Full LED lighting package and camera. Loop master knotter system, maxi sweep pickup. ISO Bus compatible, Automatic Greasing system, gazeeka moisture meter, 1000 PTO, Bales pressed 22953. Always stored in shed when not in use. Located Echuca, VIC.
|
REFERRED |
$176000
|
 |
60 |
2020 KUHN SB 1290 ID SERIAL NUMBER: KNLA1023V70A00060. 6 string, double plunger system, ISOBUS compatibilities, Gazeeka moisture meter, power feed roll. 1000 rpm PTO, Located Mulwala, NSW.
|
REFERRED |
$127000
|
 |
61 |
NEW HOLLAND 851 ROUND BALER. Will require a pre seaon. Serial no. 5423. Monitor included. Located Collie, NSW
|
SOLD |
$500
|
 |
62 |
SHERWELL 1411 28T Feild bin. Serial no. MPHW0048 With 540 PTO unload auger. side and center fill doors,man hole. Located Tallimba, NSW.
|
REFERRED |
$7100
|
 |
63 |
2012 HE SILOS 30t Field bin Serial no. F11688. with 2 side fill doors, fixed auger boot , adjustable wheel assembly for lifting and lowering, grainn site glass, over size sign. Located Tallimba, NSW.
|
SOLD |
$10100
|
 |
64 |
2019 HE FIELD BIN 20T CAPACITY MODEL FFB 20T Serial no. 14440, with 2 side fill doors, fixed auger boot , adjustable wheel assembly for lifting and lowering, grainn site glass, over size sign. Located Tallimba, NSW.
|
REFERRED |
$4800
|
 |
65 |
MPH SHERWELL 1411/2.5 33T Serial no. MPHW0058, with unloading 540 PTO unloading auger side and centre fill, man hole, access ladder manual grounding wheels, located Tullamore, NSW.
|
SOLD |
$8000
|
 |
66 |
MPH SHERWELL 1411/2.5 33T, with unloading 540 PTO unloading auger side and centre fill, manhole, access ladder manual grounding wheels, located Tullamore, NSW.
|
SOLD |
$8500
|
 |
67 |
2022 ARHENS 1512 31T COMBI BIN. Serial no. 3245 Fully welded (internal and external) 35° galvanised base construction
Easily accessible
base manhole
SPECIFICATIONS
• Internal cone is two pack paint coated for fertiliser
• Silo section ring beam to enable effective clean out
• Easily accessible base manhole
• “Zincalume” steel roof construction
• White Colorbond® sidewalls with red oxide on the inside to minimise corrosion
• 2 (Two) 1,060mm wide full-length ground rectangular filling doors
• 2 (Two) sight glasses fitted both sides in all units
• 12-inch Auger
• Manual slide gate
• Spring assisted pull
Auger Clearance Height (m)
4.042ubic Metres
39Approx. Tonnes
31,Overall Height (m)
4.58, Base Cone Angle
35, Diameter (m)
4.4. Located Tullamore, NSW.
|
SOLD |
$21750
|
 |
68 |
COLE BULK 8" HYDRAULIC AUGER 23hp Vanguard Pertol Engine with hydraulic functions Approx 15m long, Located Tallimba, NSW.
|
SOLD |
$3450
|
 |
69 |
Grainline GMP 420H Pencil Auger, 20ft x 4". Powered by a Honda engine. Features reduction winch for height adjustment. Property sold, no further use. Located West Wyalong, NSW.
|
SOLD |
$3350
|
 |
70 |
CUSTOM 12" SWING AWAY AUGER Hydraulis over cable hieght adjustment, approx 85' (25.9m), manual winch swing away, with single sweep cross auger. 540 PTO Has had repairs. Located Echuca, VIC.
|
SOLD |
$7600
|
 |
71 |
2022 Kenworth T610 SAR, VIN: 6F5000000NA477460 – ODOMETER: 597231kms - Powered by a Cummins X15 engine@ 600hp with Cummins extended warranty - 18-speed Road Ranger gearbox Remote control hydraulics - Meritor 46160 differentials 4.3 ratio - Inter-axle differential locks - Front and rear cross locks - Kenworth Airglide 460 airbag suspension - 5.25m wheelbase - Digital right weigh scales - Super Single Alloy steer tyres and 10 stud alloy drive wheels -Jost air slide greaseless turntable - Auto greaser - Loading lights – Barup fups bullbar and driving lights - Custom air bunk cooler – Under bunk fridge – Inverter and Microwave. Truck presents as a clean, well-maintained unit, clutch and front diff have been replaced. Truck fitted with an extensive chrome package at the cost of $80k. Please note: Vendor logos has been digitally removed from photographs. Sold unregistered as per Terms & Conditions. Located: Quandialla, NSW
|
REFERRED |
$200500
|
 |
72 |
2021 KENWORTH T610 SAR 50th ANNIVERSARY EDITION, VIN: 6F5000000MA470294 – ODOMETER - 683881.8 kms - Powered by a Cummins X15 engine@ 600hp with Cummins extended warranty - 18-speed Road Ranger gearbox Remote control hydraulics - Meritor 46160 differentials 4.3 ratio - Inter-axle differential locks - Front and rear cross locks - Kenworth Airglide 460 airbag suspension - 5.25m wheelbase - Digital right weigh scales - Super Single Alloy steer tyres and 10 stud alloy drive wheels -Jost air slide greaseless turntable - Auto greaser - Loading lights – Barup fups bullbar and driving lights - Custom air bunk cooler – Under bunk fridge – Inverter. Truck presents as a clean, well-maintained unit. Cummins midlife has been completed, clutch and front diff have been replaced.. Truck fitted with an extensive chrome package at the cost of $80k. Please note: Vendor logos has been digitally removed from photographs. Sold unregistered as per Terms & Conditions. Located: Quandialla, NSW.
|
REFERRED |
$210500
|
 |
73 |
2017 KENWORTH 409 SAR. VIN: 6F5000000HA459770. GCM:97000kg GVM:26500kg, Cummins X15 Engine @ 550HP S/N: 79985002 *18SP R/Ranger with hydraulic PTO and return line *Meritor 46-160 differentials 4.30 ratio with inter axle diff lock and rear wheel cross lock* airglide 460 air suspension *10 stud alloy rims *5.7m wheelbase *50" bunk with custom air bunk cooler *inverter and microwave *Red dot cabin A/C *Analogue air gauges and ABS *auto greaser *Jost fixed greaseless turntable *Battery Isolator *raised air intakes *BAR-Up Bull bar FUPS compatible *driving lights *Rear dolly pull *This prime mover has extensive maintenance and rebuild history. One owner truck. Sold no registration as per T&C's (PLEASE NOTE: personalized number plates not included). Contact your Benabilla agent, Garry McCoullough: 0428 752 657 or Craig McCoullough: 0458 720 718. Located Young, NSW.
|
REFERRED |
$141500
|
 |
74 |
2017 KENWORTH T610 VIN 6F5000000HA459070 1292459KM. GCM:110000KG GVM:26500KG. PTO Hydraulics, front and rear hydraulics(return plumbed to rear only) , 7.2t front suspension, Kenworth air glide 460 with meritor RT46-160GP differentials 4.30 ratio. Autoclima bunk cooler, microwave inverter, fridge, Isri dair driver seat, cross lock greaseless HOLLAND greaseless turntable. anderson plug, Bar up bull bar with new driving lights,(contents of tool box not included and sale truck is still working km will vary.) More information to come. Located Griffith,NSW.
|
SOLD |
$137000
|
 |
75 |
2015 Kenworth T659 Prime Mover, VIN: 6F5000000FA454330. Cummins ISX E5 engine rated at 550 HP * 18-speed Road Ranger gearbox with PTO, hydraulics and return line * Meritor 46-160 differentials, 4.30 ratio * Front and rear diff locks and cross locks * 106 tonne rated * front Diff replaced * KW Airglide 460 8 air suspension * 10-stud alloy rims on drives, super single steer rims * 50-inch sleeper cab * LG compressor Brass Monkey upright fridge, icepack and diesel heater fitted 2 years ago * Mr Bullbar bullbar with fups and driving lights * Right weigh digital scales * Holland fixed greaseless turntable * Lubecore auto greaser * Rear loading lights * Vendor states engine work was completed approximately at 800 k, front and rear structure work completed approximately 5k ago. Sold unregistered as per T & C’s. Located Temora, NSW.
|
REFERRED |
$80500
|
 |
76 |
2014 KENWORTH T909 PRIME MOVER. VIN. 6F5000000EA452150. Engine no. 79724983. Roadrelay 5. Cross locks and diff locks. UHF. Red dot air con. Remote controlled hydraulics with return line. Bluetooth Right Weigh scales. Neway suspension. Battery isolator. Fixed Holland greasy turntable. 10 stud alloy rims. King Bars bull bar. Total length is 7.5 metres. Centre of steer to centre of drives is 5.1 metres. Located Walgett, NSW
|
SOLD |
$120500
|
 |
77 |
2014 KENWORTH T909. VIN. 6F5000000EA453446. Engine no. 80567764. Cummins X15 (recent crate engine). Neway suspension. Remote controlled side tipper hydraulics. Full cross and diff locks. Roadrelay 5. Trailer brake release valve. UHF. Red dot air con. Bluetooth Right Weigh scales. Jost fixed greasy turntable. Battery isolator. Bar Up bull bar. Total length is 7.4 metres. 5.1 metres from middle of steer axle to centre of drives. Located Walgett, NSW
|
SOLD |
$118500
|
 |
78 |
2012 KENWORTH T909 PRIME MOVER, VIN: 6F5000000CA446900. Odometer: 235760.8kms * Hrs: 19580.2 * Cummins ISX EGR engine rated at 550 hp * 18-speed Road Ranger gearbox * PTO and remote-control hydraulics, front-only return-line hydraulics * Meritor differentials at 4.30 ratio * 106 tonne rated * Front and rear diff locks and inter axle diff lock * wheel base 6.1m * Kenworth Airglide 8bag air suspension * 10-stud alloy wheels all round * Jost fixed turntable * 50-inch bunk which had a professional upgrade including installation of an Icepack 2000 S bunk cooler * Diesel heater * Inverter * TV and microwave * LG compressor upright fridge. * Mr Bullbar Fups bulbar and driving lights * Red Dot AC * Airtec weight gauges in cab and rear of cab * Flashing beacon * Jost fixed greaseless turntable * Groeneveld auto greaser * Rear loading lights * Vendor states the motor has previously had an in chassis rebuild * Clutch has been replaced * Sold unregistered as per T & C’s. Located Temora, NSW.
|
REFERRED |
$80500
|
 |
79 |
2008 KENWORTH T658. VIN. 6F50000008A437925. Side tipper hydraulics. Cross locks and diff locks. Road relay 4. UHF. Tri drive. Double chassis rails. Neway suspension. Battery isolator. 10 stud steel rims. Rear pull. Total length is 9 metres. Steer axle to middle drive axle is 5.4 metres. Located Walgett, NSW
|
REFERRED |
$20000
|
 |
80 |
2008 KENWORTH T408. VIN: 6F50000008A437798. Cummins ISX engine, with a documented engine rebuild completed in 2022 (Attached). Odometer currently showing 534,200 km (odometer rolled over: 1,534,200 km total). Approximately 250,000 km travelled since engine rebuild. Rated at 26,500 kg GVM and 97,000 kg GCM. Very Clean and Tidy. PTO and Hydraulics can be installed by the Vendor after the sale, subject to agreed price and buyer requirements. Located Dubbo, NSW.
|
SOLD |
$77500
|
 |
81 |
2006 KENWORTH T 404 S GVM:26500 kg GCM 90000KG Cummins ISX - 500 Engine S/N : 79205914 18 speed road ranger gear box, kenworth airglide 460 suspension, dana DS642P @ 4.33 ratio diffs,. 10 stud alloy rims. Extensive rebuild history front hubs rebuilt new tacometers, engine, gearbox and front diff all rebuilt. vendor states has supprorting doccuments. PTO Hydraulics with return line and remote. Holland ballrace turntable, BAXTERS ADR battery switch, ABS. wheel base 4730mm, mochila evaproative bunk cooler. Located Goolgowi, NSW.
|
REFERRED |
$36500
|
 |
82 |
2012 KENWORTH K200 BIG CAB VIN: 6F5000000CA446748. GVM: 26000 GCM:97000 18 Speed road ranger, PTO hydraulics, with return line, Meritor 46-160 Differentials @4.30 ratio. Air glide 460 Suspension, inter axle lock, draw fridge and storage box, Icepack, right weigh digital scales, Greaseless turn table, battery Isolator, 2 x UHF AM / FM radio, Microwave and inverter, Alloy Bull bar Mr Bull bar with driving lights, power steering box Reco Gear box Diff Reco and new clutch 720516km 10/092021, Replaced front diff gear box yolk and front drive axle 280763km 16/12/2024 Replaced Gear box replace clutch cross shaft 363195km 30/06/2025 maintenance history available . Located Avoca, VIC.
|
REFERRED |
$48750
|
 |
83 |
1981 KENWORTH K124. GVM: 25400 Serial No: 405799. 18spd Eaton Fuller Roadranger. Suspect original NTC400 Big Cam Cummins Engine. Unknown Kilometres. Reacent Filter and oil changes. Hendrickson walking beam suspension. Hydraulics with return. Runs & Drives. As is. Located Dubbo, NSW
|
SOLD |
$19000
|
 |
84 |
1979 KENWORTH K125 VIN:404316, Cummins Formula 290 9 SPEED Road ranger Gearbox, Dana Spicer at 3.70 Ratio Kenworth Air glide 200 suspension, Greasy turn table, spider rims, Older truck that would suit restoration or on farm use, Sold as per T&C's, Truck started drove to the location of photographs, Located Mudgee, NSW.
|
REFERRED |
$6000
|
 |
85 |
2015 4800 FXB Western Star. VIN:5KKJBEDR6FPGC1812.GVM: 27400kg GCM 90500kg. Engine DD15 at 560hp, 18 speed road ranger gear box, Meritor 46-160 4.30GP Diffs, air liner airbag suspension, 10 stud alloy rims.. Wheelbase 5.2m Quad tanks 3 x fuel 1 x hydralics greaseless JOST turntable, Big rig Texas style bar fitted, Big rig driving light mounts, battery isolator, UHF. pto hydraulics, supprting documents for replacement of front main seal, rear main seal, clutch and gear box, fuel cooler, egr cooler 2024 new ECU 2025, hydraulics fitted and front suspension relpaced 2026. Located Wyalong NSW.
|
REFERRED |
$25000
|
 |
86 |
2006 Mack LT Superliner, VIN: 6FNL05F6950712072. Caterpillar C15 engine*550 HP * Engine No. 9NZ000905 * 18-speed Road Ranger gearbox * GVM: 26,000 kg * GCM: 90000kg * Approval rating for 106 tonne * Meritor differentials at 4.3 ratio * Hendrickson Primax suspension * Diff lock and cross locks * PTO and side-tipper hydraulics with return line * Added airlines to rear of cab * Jost fixed greaseless turntable * Jost Air slide turntable adjuster * 10-stud alloy rims * Mr Bullbar Fups bulbar * Driving lights * Anderson plug at rear of cab. Vendor states complete front end rebuild and all brakes have been relined. Sold unregistered as per Terms & conditions. Located Blayney, NSW.
|
REFERRED |
$66000
|
 |
87 |
1989 International T2670, VIN: 6F2FF2600KDV10712. 400 Cummins,15 speed Road Ranger gearbox, Rockwell differentials, Hendrickson Spring suspension, 72T rated,10 stud alloy steer rims, spiders on drive. Hydraulics including front and rear hookups and return line at front, has manual outside control spool with hydraulic pressure gauge fitted, ball race greasy plate turntable. Viesa Platinum bunk cooler. Integrated cab bunk, Keith alloy bullbar with driving lights, 2 x tool boxes, dangerous goods wiring and exhaust guard, ex-tanker truck. Sold unregistered as per T & Cs. Located West Wyalong, NSW.
|
REFERRED |
$12250
|
 |
88 |
2003 FREIGHTLINER ARGOSY PRIME MOVER. VIN 1FVJAWCK64L994616. Air bag suspension. Side tipper hydraulics. Rear diff lock and single cross lock. Bunk cooler. Located Walgett, NSW
|
REFERRED |
$10250
|
 |
89 |
2017 IVECO Powerstar 6800 VIN 6F2SFAN00HDA30054. ODO: 991324KM GCM: 90000. GVM: 24700 Iveco Cursor 13 Diesel Engine set at 560Hp. Automatic transmission. Air bag suspension. RT46-160GP 3.73:1 differential. Hydraulics with return line. Digital right weigh scales. Greaseless turntable. Battery isolator. 10 Stud alloy rims with 275/70R22.5 tyres. Sold with no registration as per T&C's. Located. Wargin, NSW.
|
SOLD |
$16400
|
 |
90 |
WESTERN STAR 4800FX. VIN 2WLNDDRJ61K969456. 800,000kms on engine rebuild by the previous vendor. Neway suspension. E stops. Battery isolator. 2007 Tefco bins. Will require new turbo. Vendor will supply and fit new turbo upon sale. Also included is the 2007 Tefco quad dig tipper with VIN. 6T9T24R0870KYM004. Hendrickson axles and airbags. Brakes have recently been replaced and are at 80%. Bushes and air bags have been replaced on the trailer. Truck bin measures 4.6 metres x 1.1 metres. Trailer bin measures 7.4 metres x 1.2 metres. Located St Ruth/Dalby, QLD
|
REFERRED |
$35000
|
 |
91 |
2011 FREIGHTLINER CST112 TIPPER. VIN 1FVHF0DV4CLBK8016. 476,974kms are genuine. New turbo. . Electric tarp. Ex Toowoomba Shire Council. Steel side tipping bin with electric retractable tarp. Airliner suspension. 10 stud rims. Ring feeder. TWE side tipping body measures 4.7 metres x 1.2 metres. Located St Ruth/Dalby, QLD
|
REFERRED |
$23500
|
 |
92 |
1996 MACK CHR ELITE RIGID TIPPER, VIN: 6FMG14E02ATB03851. EA7 454HP Mack engine, Road Ranger gearbox with PTO, Meritor Diffs, Hendrickson suspension on Spider rims, bull bar, flashing beacon, UHF. Custom made steel tipper body with two-way tailgate. Manual roll out tarp, rear implement hitch on chassis (no compliance plate sighted). Front springs and front diff have been replaced. Truck has passed HVIS inspection on 04/08/2026, currently registered. Sold unregistered as per terms and conditions. Located Wilcannia, NSW.
|
REFERRED |
$6250
|
 |
93 |
2001 INTERNATIONAL ACCO 2350G. VIN 6F22523001DH00162. Cummins ISC replaced 1000kms ago valued at $20,000. 6.7 metre tipping tray. Air bag suspension. Spider hubs. Two way tailgate. Battery isolator. Located Narromine, NSW
|
REFERRED |
$22500
|
 |
94 |
2012 UD MK 11250 SERVICE TRUCK. VIN JNBMKB8EC00K00392. UHF and Cel Fi included. Driving lights. Maxi lift 260 Hiab included with 119 hours showing. Twin toolboxes. Compressor not included. Tray length is 5600mm. Work lights and flashing beacons. 3 seater. Cracked windscreen. Located Guyra, NSW
|
REFERRED |
$15000
|
 |
95 |
1995 MITSUBISHI CANTER500/600. VIN 6F6G4G77DST000047. 4X4. 3 seater. 200 litre water tank. DC/DC charger. Only 20kms on engine rebuild worth $15,000 including new pistons, rings, fuel pump, injectors, main and big end bearings. Transmission rebuild 5000kms ago with new bearings and synchors. Invoices in photos. 3.5 metre fully alloy sprung tray. Twin 1600mm toolboxes. Registered in NSW to March 2027. Will be sold unregistered per auction T&C's. Located Narrabri, NSW
|
REFERRED |
$7000
|
 |
96 |
1979 MAN 24-192 TIP TRUCK FE24192TS MODEL, CHASSIS: 33600650065 • Odometer: 749800 •192 HP MAN 5 cylinder diesel motor • 6SP manual gearbox • GCM 35000 • MAN diffs • MAN springs • Twin steer bogie drive • bin length 6.8m, height 1.8m, width 2.7m • steel tipper in good condition, ideal large capacity tipper suit farm. Would also suit collector as truck is in good condition for age • Sold unregistered as per T & C’S • Located Cumborah, NSW.
|
REFERRED |
$3001
|
 |
97 |
1970 MERCDES-BENZ LK 2624 VIN: 34330420673883, Diesel engine, Manual gearbox, spring suspension, timber floor tray, length 7.85m width 2.5m. 8 stud steel rims, bogie drive, sold as per T&C's, located Mudgee, NSW.
|
REFERRED |
$3800
|
 |
98 |
2008 DAF CF7585 8x4. VIN XLRAD85MC7E799716. 26 foot tray. Battery isolator. 20 foot container pins. Ring feeder. Dog trailer sold separately. Air suspension. Battery isolator. E stops. Bogie drive. Warnings on dash are not detrimental to this machines current performance. Located Walgett, NSW.
|
REFERRED |
$47000
|
 |
99 |
2007 SHULZ FLAT TOP DOG TRAILER. VIN. 6T9T2400S721HR004. Air suspension. 10 stud alloy rims. Toolbox. Spare tyre. SAF axles. Located Walgett, NSW
|
REFERRED |
$26000
|
 |
100 |
2021 MOORE 32FT X 7FT TOA TIPPER. VIN. 69LMTSMTMP002096. Hendrickson Tiremaax. Hendrickson axles and air. 10 stud alloy rims. Drum brakes. RT lead. Roll over tarp. Air tailgate. Watertank. Air Weigh Bluetooth guage. This asset is a repaired, repairable write off. Currently registered to October 2026, will be sold unregistered per the auction T&C's. Located Walgett, NSW
|
REFERRED |
$73500
|
 |
101 |
2021 LUSTY EMS 2021 LUSTY EMS SLIDING A-TRAILER R/T LEAD zin: 6F80000000L109479. Air bag suspension with BPW axles & 10 stud rims. Right weigh digital scales, water tank, air operated tail gate, fitted with ring feeder, air, hydraulics and electrics to both deck and rear hook up, razor electric rollover tarp. front and rear ladders, rear submarine door, greaseless fixed JOST Turntable. Bin measurements length 8.95m width 2.45m height 2.03m pin to front 1.18m pin to rear 1.1m over all length 11.84m. Located Echuca, VIC.
|
SOLD |
$107000
|
 |
102 |
2016 SLOANEBUILT 7FT TIPPING COMBINATION. A trailer VIN. 6B9X3SAHHG2AE6713. Chassis tipper. Road train lead. 28ft long x 7ft high. Holland fixed turntable. B trailer VIN. 6B9X3SAHHG2AE6714. Tip over axle. 34ft long x 7ft high. On both trailers - Roll over tarps, Right weigh scales, Hendrickson axles. Air suspension. 10 stud alloy rims. Drum brakes. Sub doors. Trailers presenting in very good condition. Coming from a vendor that maintains their fleet to a high standard. Located Dubbo, NSW
|
REFERRED |
$140000
|
 |
103 |
2013 Moore B - double combination VIN: 6V9LMTSMTDP002141 (A-trailer) VIN: 6V9LMTSMTDP002142 (B -trailer) both road tailer combination trailers. A- trailer fitted with hydraulic lines with return, also fitted with rear cross member and ring feeder. Hydraulic sliding bin direction control, diverter valves, accessible via rear ladder or front submarine door, on Hendrickson axles on airbags, 10 stud alloy rims, with the bin measurements Length: 7.3m width 2.44m height: 2.15m pin to front: 1.4m, pin to rear: 1.3m, pin to pin: 7.77m, 2 way rear door with grain chute with removable extension (in B trailer toolbox) Roll over tarp, right weight scales, Wabco suspension height control lever. B- Trailer, Road train lead compliant Cross member fitted (no ring feeder). Accessible via rear ladder or front submarine door, on Hendrickson axles on airbags, 10 stud alloy rims, with the bin measurements, bin length: 10.97 width: 2.44m height: 2.15m, Pin to front: 0.8m, pin to rear 10.17m. , 2 way rear door with grain chute with removable extension (in B trailer toolbox) Roll over tarp, right weight scales, Wabco suspension height control lever. Combination overall length 20.74m, pin to rear 19.3m. Trailers present in very good condition, will be through local workshop for inspection before collection. Inspections welcome by appointment. Vendor will assist in registration inspection. Genuine reason for sale property sold, new business direction. Located Wyalong, NSW.
|
REFERRED |
$96000
|
 |
104 |
2013 PROCAMAN RT LEAD BISALLOY TIPPING TRAILER, VIN:6T9T25WA1DOCT6005
• Triaxle chassis tipper
• Maxus axles and Maxus spring suspension
• 10 stud steel rims
• New Everlast tarp and motor fitted
• Toolbox
• Water tank
• Spare tyre rack
• Two-way tailgate and grain chute
• Rubber belt mud guards
• Reconditioned hoist
• No ring feeder fitted and ring feeder bracket compliance plate not sighted
• Measurements: floor L 7.92m, overall 8.8m x H1.1m x W 2.5m, pin to front 0.600m
• Sold unregistered as per T & C’s
• Located Coolamon, NSW.
|
REFERRED |
$19000
|
 |
105 |
TEFCO B-DOUBLE SET. 2012 A-TRAILER VIN:6T9T25R04COKYM001. 2011 B-TRAILER VIN:6T9T25R09B0KYM018 A – Trailer hydraulic roll back chassis tipping body, air bag suspension with Hendrickson axle with 10 stud alloy rims, Drum brakes, plated chassis tipping well, fixed holland turn table, right way digital scales, height control lever, tipping and hydraulic control levers, diverter valve all in control box, flip over centre bar, submarine doors, sound hoist roll over tarp, Bin *Length 6.7m *height 1.83m * width 2.5m *Pin to front 1.2m *pin to pin 8.5m *pin to rear 1.6m B – trailer TOA air bag suspension with Hendrickson axles with 10 stud alloy rims, drum brakes, toolbox, water tank spare tyre carrier (Tyre not included in the sale) , right way digital scales, analogue air gauge, flip over centre bar, submarine door, sound hoist roll over tarp, Bin *Length 11m *height 1.83m * width 2.5m *pin to front 1m *pin to rear 10m *over all combination length20m (including accessories). Contact your Benabilla agent, Garry McCoullough: 0428 752 657 or Craig McCoullough: 0458 720 718. Located Young, NSW.
|
REFERRED |
$109000
|
 |
106 |
2011 MOORE 10.4 METRE TOA TIPPER. VIN 6V9LMTSMTBP002156. Hendrickson running gear including air suspension. Road train lead. Two way tailgate. Roll over tarp. 1.8 metre sides. Located Walgett, NSW
|
REFERRED |
$68000
|
 |
107 |
2009 TEFCO ALLOY ROLLBACK A TRAILER. VIN 6T9T25R0190KYM002. Two position king pin. Air bag. Holland fixed greasless turntable. Retractable tarp. Located Bourke, NSW
|
REFERRED |
$41000
|
 |
108 |
2017 GBB SLIDING A-TRAILER R/T LEAD 57m³ TARE:7760KG VIN: 6T9T25V86HOALN053. Ring feeder fitted with plumbing air and electrics (Duomatic & standard metric suzy fittings), diverter valve, Hendrickson axles and airbag suspension, lift up front axle, yard release, 2 position chassis pin lock,10 stud alloy rims, drum brakes, Pin to front 1.4m pin to rear 0.9m, Over all length 12.47m, Bin Height 2.55m x 9.65M x 2.45M. Front access rungs. Rear submarine door. Grain Chute with slide in chute extension and small grain sweep mounted on leg for storage. Vendor states roll over tarps replaced approx 12months ago, sold as per T&C's. Located Griffith/Hanwood, NSW.
|
REFERRED |
$50500
|
 |
109 |
2008 MAXI TRANS HAMELEX WHITE HXW ST3 VIN:6HUMTAHXW8H0T0621. ATM: 41000kg, Hendrickson axles on air bag suspension, 10 stud alloy rims, drum brakes, Lift up front and rear axles pin to front 0.5m, length 10.4M x width 2.50m x height 1.90m, front and rear hook up, duo coupler on rear, water/ handwash toolbox, right weigh digital scales and analogue scales at rear. hoist has been replaced, flip over centre bar, roll over tarp in good order, Located Benalla, VIC.
|
REFERRED |
$46000
|
 |
110 |
2002 B-DOUBLE SET. STOODLEY LYONHAUL ALUMINIUM 21FT ROLL BACK A TRAILER, VIN: 6C9TA8RAT22BT3066 – K Hitch axles – 10 stud alloy rims – Airbag suspension – Hydraulic roll back operation – Analogue air gauge – Holland turntable – Triple grain chute tailboard – Centre drop chute – Pelmet rollover tarp – Bin Measurements: Length: 6.65m, Width: 2.45m, Height: 1.8m, Overall length 10.7m – Pin to front 1.3m, Pin to pin 8.3m, Pin to rear 1.1m – Recent welding repairs completed, also complete axle replacements previously – 2002 ALBURY TRANSPORT EQUIPMENT TOA ALUMINIUM B TIPPER (Lyonhaul) VIN: 6GST2500022AF3002 – KH axles – Airbag suspension – 10 stud alloy rims – Analog air gauge – Pelmet rollover tarp – Spare tyre carrier – Water tank – Toolbox – Submarine door – B Trailer Measurements: Overall length 11m, width 2.47m, height 1.8m, Pin to front 1.1m, Pin to rear 9.9 m – Recent welding repairs completed, also complete axle replacements previously – A & B Overall Measurements: length: 19.4m – sold as a unit, unregistered as per T & C’s.Contact your Benabilla agent, Garry McCoullough: 0428 752 657 or Craig McCoullough: 0458 720 718. Located Young, NSW.
|
REFERRED |
$73500
|
 |
111 |
1998 LUSTY EMS 33' TOA ALLOY TIPPER. VIN 6F9T25000W25E3069. 10.4 metres x 1.8 metres. K Hitch axles. Air bag suspension. Digital bluetooth scales. Tool box. Tyre rack. Good tarp, only two seasons old. Please note cracks were evident at inspection, including chassis and will require repair. Located Bourke, NSW
|
REFERRED |
$25750
|
 |
112 |
1996 TEFCO 34FT TRI AXLE TRAILER VIN: 6B9T25000T2FH6072 Alloy TOA with grain top with roll over tarp, Teflon lined. BPW air suspension BPW axles, spider rims, K - hitch landing legs, air switch rear door, grain chute, analogue weight gauge, bin measures 2.1m (6'8") height (1.65 without grain top.) 2.49m wide 10.37m length(34ft) trailer overall length 10.68m Pin to front 0.6m, located Goolgowi, NSW.
|
REFERRED |
$27500
|
 |
113 |
1994 JRM ALLOY 10.3 METRE TOA TIPPER. VIN 6H93646HARBN67122. 1.6 metre sides. Air bag suspension. K Hitch axles. 10 stud rims. Located Walgett, NSW
.
|
REFERRED |
$33000
|
 |
114 |
1994 JRM 10.3 METRE TOA ALLOY TIPPER. VIN 6H93646HARBN67123. Air bag suspension. Road train lead. Roll over tarp. 1.6 metre sides. Located Walgett, NSW
|
REFERRED |
$49500
|
 |
115 |
1987 HOWARD 9.8 METRE ALLOY TOA TIPPER. VIN TT035. RFS axles. Air bag suspension. Spider hubs. 1.5 metre sides. Located Walgett, NSW
|
REFERRED |
$9000
|
 |
116 |
2005 HAULMARK SIDE TIPPER. VIN. 6T9T25ABF50ADM118. Roll over tarp. Spider hubs. New K Hitch axles fitted less than 50,000kms ago. Hoist was resealed 18 months ago. Spring suspension. Holland fixed greaseless turntable. Located Narromine, NSW
|
REFERRED |
$7000
|
 |
117 |
2025 AAA THREE-AXLE LEAD SIDE TIPPER TRAILER, VIN: LA993VGZ2R0CMW217. K-Hitch axles and 10 stud alloy rims, airbag suspension, electric tarp, rubber belt mud guards, twin spare tyre rack, Wabco EBS, Anderson plug, diverter valve, toolbox, 8’1” spread. RT LEAD B TIPPER, VIN: 993VGZ4R0CMW168. K-Hitch axles with10 stud alloy rims, spring suspension, twin spare tyre rack, hydraulics, electrics and air to rear, rubber belt mud guards, electric ROT, toolbox, 9’1” spread, Wabco EBS. Measurements: A trailer – pin to front 0.750m, pin to pin 7.20m. Body L5m W2.5m, H1.5m. B trailer – pin to pin 0.650m. Body L8.55m, W2.5m, H1.5m, overall length 10.25m. Sold unregistered as per T & Cs Located Blayney, NSW
|
REFERRED |
$100500
|
 |
118 |
CUSTOM 9 METRE SIDE TIPPER. Suit off highway application. Road train lead, with no ring feeder. Single acting hydraulics, with no need for side tipper air valves. Spring suspension. Spider hubs. Located St Ruth/Dalby, QLD.
|
REFERRED |
$16000
|
 |
119 |
Used 1990 Hamelex Tipper Dog Trailer, Tri Axle, Steel Body, Spring Suspension, Air operated tail gate, Retractable Tarp, Vin number: VTRL02686G118 EXEQ Stock No 161753 Located Shepparton Vic
|
SOLD |
$11000
|
 |
120 |
2017 CM COTTON FRAME + 1995 FREIGHTER DROP DECK. VIN. 6F8T25003SB055633. Spider hubs. Road train lead. Spring suspensions. 255/70R22.5 tyres. Measuring 13.75 metres including the Collier & Miller cotton frame. Located Narromine, NSW
|
REFERRED |
$47750
|
 |
121 |
2021 CM COTTON FRAME + 2008 VAWDREY DROP DECK. VIN. 6HJVAWAUS8SE04939. 10 stud alloy rims. 275/70R22.5 tyres. Air suspension. Ramps included. Measuring 14.2 metres including the Collier & Miller cotton frame and ramps. Located Narromine, NSW
|
REFERRED |
$47750
|
 |
122 |
2008 BARKER B DOUBLE FLAT TOPS. A trailer VIN. 6J6006636AA8W1798. Load binders. Vigia Air system. Digital scales. Water tank. Tarps included. BPW axles and air. 8.2 metres deck length. Jost fixed turntable. B trailer VIN. 6J6006636AA8W1799. Load binder. Vigia air system. Digital scales. Water tank. Tarps included BPW axles and air. 13.1 metres b trailer length. Lift up front axle on A trailer and front and rear axle on B trailer. Located Mudgee, NSW
|
REFERRED |
$39000
|
 |
123 |
2001 LUSTY DROP DECK, Manufactured by PUMPA ENGINEERING, Air bag suspension, with rear steering axle, BPW axles 8 stud steel rims, analogue right weigh scales, 19.5'' tyres, pin to front 0.97. (movable skid plate, top deck length 3.68m, bottom deck 8.66m over all length 12.34m width 2.5m, 3-way container pins (post not included) water tank, toolbox, very rear of trailer does have rust see photos, Located Mudgee, NSW.
|
REFERRED |
$19000
|
 |
124 |
2010 BARKER A TRAILER SKEL, VIN: 6J6006636GAAW2963 bpw air suspension BPW under slung axles, Jost greasy turn table, 8 stud alloy rims, 265/70R19.5 drum brakes, Pin to front 0.7m, pin to rear, overall length 10.4m. Located Echuca, VIC.
|
REFERRED |
$4500
|
 |
125 |
2020 PANUS FLAT TOP WITH CONTAIANER PINS VIN:MP7FL3199KT021170. On air bag suspension with 10 stud steel rims 3 way container pins, checker plate flooring. slide in blindce rails, 13.75m in length, Pin to front.1.4m width 2.45m. Sold as per T&C's. Located Echuca, VIC. .
|
SOLD |
$32000
|
 |
126 |
1999 TRIANGLE TRANSPORT EXTENDABLE FLAT TOP TRAILER. VIN 6B9T25000X2Z22001. Measuring 24.4 metres when extended. 14.6 metres when closed. Spring suspension. Spider hubs. Located Walgett, NSW
|
REFERRED |
$16500
|
 |
127 |
1985 SMITH TRI AXLE STOCK CRATE. VIN. 148. Trailer presents very well for its age. New skid plate and pin 12 months ago. New bottom deck 4 years ago. Brakes, bearings and S cams have all recently been replaced. HVIS inspection not due in NSW until May 2027. Currently registered in NSW, will be sold unregistered per the auction T&C's. Spring suspension. Spider hubs and rims. This trailer would go straight to work. Located Dubbo, NSW
|
SOLD |
$35250
|
 |
128 |
GTE B DOUBLE TANKERS. 316 stainless steel tanks. Currently set up for bulk water trasnfer. A trailer 2012 GTE VIN 6T9T25WA1C0AAN191. Tank capacity is 17,600 litres. Hendrickson axles and air. Also is a road train lead with no ring feeder. Jost fixed greaseless turntable. B trailer 2000 GTE VIN. 6T9T25WA1Y1AAN025. 19,998 litre capacity. Hendrickson axles and air. 17.2 metres total length and 16.2 metres from rear of B trailer to pin on A trailer. Located St Ruth/Dalby, QLD.
|
REFERRED |
$18500
|
 |
129 |
2014 RHINO TRI AXLE DOLLY. VIN 6B9JT6AC6ETAT7172. Fixed greasy turntable. Spring suspension. TMC axles. 10 stud rims. 4.4 metres from pin to pin. Located Walgett, NSW
|
REFERRED |
$17750
|
 |
130 |
2015 MOORE TANDEM DOLLY. VIN. 6V9LMTDLTFP002011. Hendrickson air bag on K Hitch axles. 10 stud alloy rims. Right Weigh Bluetooth scales. Jost fixed greaseless turntable. 4.0 metres pin to pin. Hydraulic line to front. Located Walgett, NSW
|
REFERRED |
$23500
|
 |
131 |
2016 JOHN DEERE 1590 BOX DRILL. Serial no. 1N01590XKG0765263. 15ft on 10 inch spacings. Working with of 4.55 metres. Small seeds, grain and fertiliser box. Slow reduction gear in the main box for sowing small seeds and pastures. Upgraded Arex depth adjusters on the units. One owner, always shedded. Original discs. Hydraulic down force. Front row lock up to sow on wider rows. Upgraded rear tyres. Spare tyre and rim. Spare parts and manual included. Boxes present in excellent condition. In general, the machine presents in excellent condition and is ready for work. Located Delungra, NSW.
|
REFERRED |
$37000
|
 |
132 |
1 X NOVUS AUGER EXTENSION. To suit John Deere S series headers. 1.5 metres in length. Have done approx 100 hours of work. Adaptor bracket on pallet is included. Located Goondiwindi, QLD.
|
REFERRED |
$100
|
 |
133 |
1 X NOVUS AUGER EXTENSION. To suit John Deere S series headers. 1.5 metres in length. Have done approx 100 hours of work. Located Goondiwindi, QLD.
|
REFERRED |
$100
|
 |
134 |
2007 CROPLANDS PINTO.70ft (21.3m) Bargam boom 2800l Tank, Hydraulic driven pump, with freshwater tank and foam marker (vendor does use foam marker), Granny pot , wing break away, on BPW axles hubs, pump rebuilt, Located Temora, NSW
|
REFERRED |
$7250
|
 |
135 |
CIRCA 1999 HARDI COMMANDER 5033 SPRAYER, MODEL:COMS36635033, SERIAL NUMBER: 9903152. Chassis number 240450. Approx 5000L tank capacity, hand wash, Rate controller, ANNOVI REVERBERI hydraulic pump, Spring suspension, granny pot, approx. 36m boom. has had repairs. Located Echuca, VIC.
|
REFERRED |
$900
|
 |
136 |
PARKES STEEL PRODUCTS PTO GRAIN ROLLER. Vendor States only processed 40 tonnes. As new. Property sold, no further use. Located West Wyalong, NSW.
|
SOLD |
$15250
|
 |
137 |
2017 Supreme International 600 vertical mixer, Serial number: 160017. PTO rpm 540. Minium 100hp tractor required. Digi Star EZ2810 scale and Digi Star RD 2500V scale. 6350kg 13.2m3 capacity. 23 x 75 x17.5 tyres. Robust planetary gears. Single auger. Machine hasn’t done a lot of work and always sheded when not in use. Property sold, no further use. Located West Wyalong, NSW.
|
REFERRED |
$57500
|
 |
138 |
2013 KELLY DIAMOND HARROW 40. Serial no 1130198. Original discs, Bute 625's on the front and Bute 825's on the rear. Purchased ex Demo. Brand new wheel bearings all around. Ready for work. Located Warren, NSW
|
REFERRED |
$62500
|
 |
139 |
Circa 2011 John Deere 956 MoCo pull-type rotary mower-conditioner,
Serial Number *1E00956CHBB371507*, Model - 956-4.5 ROT MC-C.
Key Specifications and Features
• Cutting Width: 4.5m, 9 x cutting discs (turtles)
• Standard 1000 RPM PTO drive, centre pivot design
• Steel conditioner rollers
• Two-point hitch for easy attachment to tractors
• Hydraulic angle adjustment and head tilt for precise cutting and conditioning
• Rear tires sized 31x13.50-15
• Standard lighting for road transport
• Fold-up access doors for easier maintenance and inspection
• Camera fitted for working observation
• Located Warracknabeal, VIC.
|
REFERRED |
$11750
|
 |
140 |
Circa 2000 Reman Bale stacker, S/N:211212. Twelve bale stacker, with 4 x 3 arm fitted and 4 x 4 arm included in the sale (see last 2 photos stored on container). Electric remote refurbished, Hydraulics powered, electric activated functions. Located Warracknabeal, VIC.
|
REFERRED |
$20500
|
 |
141 |
Circa 1980's Grizzley 36 Plate off set, working witdth approx 6.8m with a travelling folded width approx 4,4m, heavt machine no longer required. located Echuca VIC.
|
REFERRED |
$10000
|
 |
142 |
CIRCA 1982 SYMONS BLADE PLOUGH. Heavy Duty Blade Plough. 5 tynes with bolt on sweeps and one spare complete sweep, hydraulic lift, manual adjustable draw bar. Sweeps measure 0.73m to 0.87m wide, work width 3.30m, plough overall width 3.35m and length 5.9m, tyre width 2.95m. Located Mount Hope, NSW
|
REFERRED |
$4100
|
 |
143 |
2010 LONKING LG100DT FORKLIFT. Serial No# 310100203965.2.5m tynes, 4m max height lift, pneumatic tyres, Located Echuca, VIC.
|
REFERRED |
$7600
|
 |
144 |
FORKLIFT SLIPPERS / EXTENSIONS. Located Dubbo, NSW
|
REFERRED |
$475
|
 |
145 |
2015 CAT 312E L Excavator VIN: CAT0312EKWEY00671. Original hours 2906.7. Well-presented machine with auxiliary piping (not used on hammer), rear blade, good track gear, and air-conditioned cab. Supplied with three buckets (600mm, 900mm, 1200mm) plus one ripper. Features include rear camera, canvas seat cover, isolation switch, UHF radio, and flashing lights. Good service history. Purchased new and selling due to upgrade. Length 4.3m blade to end of track, width 2.5m. Located Wilcannia, New South Wales.
|
REFERRED |
$50250
|
 |
146 |
CIRCA 1980 BHB ENGINEERING 6T TRACTOR CRANE, Serial No: 5779. Extendable boom 6 tonne capacity, John Deere 4-cylinder diesel engine, 2066 hours, Chamberlain running gear, multi boom lifting points, battery isolator, air compressor and tank fitted with truck fitting outlets, extra air lines supplied for trailer connection, good tyres. Sold with no crane certification. Very versatile machine for yard or property. Located West Wyalong, NSW.
|
SOLD |
$8250
|
 |
147 |
Circa 1979 Hyster H800A forklift, serial number A117E-1544Z, Cummins 903 V8 engine, 1,402 hours, air-conditioned cab and flashing beacon. Includes INV forks and a 20-foot to 40-foot top-lift frame, 31.5 tonnes lift capacity with retracted forks. Machine is just out of work and is being sold due to an upgrade. Vendor states right hand steering ram leaking, not shown in photos. Please note: The vendor can assist with contacts for boom disassembly for transport. Location: Marrar, NSW.
|
REFERRED |
$1000
|
 |
148 |
2009 HAYES 3PL 16 METRE SPRAYER. Manual fold. Hydraulic/electric lift, only need two hydraulic remotes. Hypro pump, rebuilt 2 years ago. 1200 litre tank. Double side foam marker. 3 sections. Full wiring included for section and rate control including TEEJET display. One owner from new. Cat 3 linkage. Pendulum swing. 500mm spacings. Located Yallaroi, NSW
|
REFERRED |
$5500
|
 |
149 |
2015 ATN PIAF ML 810. Serial no. P8115013. 8 metre reach. Rechargable electric system. Battery isolator. 2nd owner from new. Only a low 188.3 hours. Also supplied with a 2022 Stonegate Industries box trailer to suit. VIN. 6MRBOXTRLNC039925, registered to April 2027. Located Coffs Harbour, NSW
|
REFERRED |
$8750
|
 |
150 |
GOWLANDS BODYWORKS 18FT STOCK CRATE. New sheep/goat decks. Side delivery. Removable centre posts for single one. Supplied with 4 x stands clamps to hold crate to the tray. Custom
built block gates and custom ramp. Removable winch. Minimal structural rust, if any was observed. Crate presents in very good condition structurally for its age. Located Nyngan, NSW
|
REFERRED |
$3250
|
 |
151 |
2020 TOYOTA HILUX SR5. VIN: MROHA3CD800451663. Engine no. 1GD0827243. 284,760kms. Registered to June 2027. Tow bar. UHF. Trailer brakes. ARB steel bull bar. Driving lights. Located Warren, NSW
|
SOLD |
$17750
|
 |
152 |
2013 TOYOTA LANDCRUISER TROOP CARRIER. VIN: JTERV71J900006268. UHF. Steel ARB bullbar. Modification plate to be an 8 seater. This lot will not be supplied with all seats. New heavy duty suspension with a 5 inch lift. Tow bar. Spare tyre and Jerry can holder. Rust eveident, see photos. Located Walgett, NSW
|
REFERRED |
$8000
|
 |
153 |
2006 TOYOTA LANDCRUISER 100 SERIES. VIN. JTEHT09J005513933. Odometer: 382,718km. V8 Petrol Engine. 7 seats. Bull bar. Spotlights. Roof rack. Sub fuel tank. Front seat covers, Serviced every 10,000km. Very clean inside and out and presents well for its age and kms. Tyres: worn. Located Dubbo, NSW.
|
REFERRED |
$8500
|
 |
154 |
1998 TOYOTA LANDCRUISER 75 SERIES. VIN: JT731PJ7508548184. New battery. New brakes and rotors all around. Handbrake does need adjusting. Heavy duty springs. New headlights. New tail lights. Registered to February 2027. 4.2 litre straight 6 engine. Bull bar. Tow bar. Air con. Extractors. Canopy included. Work lights. UHF. Vehicle will be supplied but not fitted with new rear windscreen. Located Dubbo, NSW
|
SOLD |
$10000
|
 |
155 |
1994 TOYOTA HILUX LN106R. VIN: JT73ILNA609033531. Suspect ~130,000km on second hand replaced motor. Comes with spare filters and Origional Engine (With new injector pump, but has blown bottom end, tops good) . 4x4. No Tray. As is. Located Dubbo, NSW
|
SOLD |
$2600
|
 |
156 |
1973 TOYOTA FJ45 LANDCRUISER 4WD
6 CYL PETROL MOTOR. Odometer 39231km, manual transmission, wood tray, tow bar, freewheeling front hubs, VIN: illegible. Vehicle not running. Has some rust. Ideal for restoration. Sold unregistered. Located Broken Hill, NSW.
|
REFERRED |
$1900
|
 |
157 |
1973 TOYOTA FJ45P LANDCRUISER 4WD, CHASSIS: FJ45-59633. 6 CYL PETROL MOTOR, Odometer 94,213 miles, manual transmission, steel tray, factory fitted PTO, tow bar. Vehicle not running. Ideal for restoration with some rust. Sold unregistered. Located Broken Hill, NSW.
|
REFERRED |
$1900
|
 |
158 |
YAMAHA WOLVERINE X2 R-SPEC ATV. Brakes recently redone. New front tyres fitted, four new CV boot covers installed and fully serviced. Light bar, UHF. Power steering. Located Dubbo, NSW
|
REFERRED |
$6250
|
 |
159 |
2021 POLARIS RANGER 500. New clutch fitted. No power steering model. Near new tyres, snorkel fitted, UHF radio, seat covers and spotlight handle installed (spotlight not included). Crack in rear windscreen. Located Dubbo, NSW
|
REFERRED |
$4000
|
 |
160 |
2021 HONDA SXS1003PM. VIN:1HFVE04A4M4502816 Odometer: 52,165km. Engines fine, Transmission has suspected Sensor issure and can cut out when idlin in gear. Located Dubbo, NSW
|
REFERRED |
$4200
|
 |
161 |
2007 SUZUKI DRZ400 MOTORBIKE. No clutch leaver. Has not been started for an extended period.
|
SOLD |
$700
|
 |
162 |
2003 YAMAHA RAPTOR 90 MOTORBIKE. Starts and runs, but does not idle. Located Warren, NSW
|
SOLD |
$650
|
 |
163 |
2017 CRF 250R MOTORBIKE. Engine rebuilt 25 hours ago. Full FMF exhaust, with dual FMF 3.1s. Located Warren, NSW
|
SOLD |
$4200
|
 |
164 |
RIDE ON LAWN MOWER. Had minimal use, Will come with new battery. Located Dubbo, NSW
|
REFERRED |
$1700
|
 |
165 |
GOLF CART. Presents good for age, suspect made ~2001. Located Dubbo, NSW
|
REFERRED |
$1900
|
 |
166 |
2024 AUSTRACK GIBB 16B CARAVAN, VIN LA914DA22R0KPS135. single axle with GTM 2,700kg, ATM 3,000kg and tare 2,415kg. Vendor states the caravan has travelled approximately 10,000 kilometres. Features include McHitch coupling, Anderson plug, breakaway connection, independent coil suspension with dual shock absorbers, alloy rims and LT265/75 R16 tyres. The van is fitted with double front tunnel toolboxes, rear toolbox and spare wheel carrier, electric awning, toolbox strip lighting, reverse camera, multiple exterior lights and an electric fold-out step. External setup includes an outside fridge on slide, slide-out kitchen and sink, full outside pantry, outside shower, dual external gas connections and multiple charging ports. Inside is equipped with a Dometic reverse-cycle air-conditioning unit, diesel heater, full gas cooktop and oven, dishwasher, shower and toilet, TV and stereo system, centre lounge and removable dining table. Sleeps 4, double bed and two bunk beds, with 12-volt fans fitted at each bed. Power and touring equipment includes 12-volt batteries housed in the underfloor compartment, Redarc battery charge manager, gas and electric hot water system and 12v–240-volt gas/electric fridge. Front, rear and grey water tanks are fitted with level indicators. Vendor advises the caravan was still being used at the time of inspection and will be fully detailed prior to delivery. Overall, a well-equipped family touring caravan with extensive storage, amenities and off-grid capability. Located Balranald, New South Wales.
|
REFERRED |
$26000
|
 |
167 |
2012 JAYCO SWAN. VIN. 6AM000000C1P31097. Sleeps 6. Spring suspension. Fridge, with gas 12v and 240v options. Gas cooktop. Microwave. Electic water pump. TV port. Spare tyre. One owner since new. Registered to May 2027. The following extras are included - 15amp power cord, conversion power pack, 12 volt portable ac, outside floor mat, annex walls for large extra room, clothesline, kitchen utensils, cutlery & crockery, car extension mirrors, 12 volt shower kit, 20 litre solar camp shower, tool box with tent pegs plus hammer, caravan cover. Located Narromine, NSW
|
REFERRED |
$6750
|
 |
168 |
2016 JOHNNO'S CAMPER TRAILERS TOURER VIN: 6K9TURERTGM156006. Big Fridge slide, full annex, Original running gear and tyres, will fit queen size mattress. Camper presents as clean and tidy unit. Recently re greased. Vendor states traveled <500Km. Batterys and Mattress not included. Sold unregistered. Located Eurimbla / Cumnock NSW
|
REFERRED |
$500
|
 |
169 |
2013 PALAMINO BRONCE SLIDE ON CAMPER B-1251, VIN: 4X4SBR304EN104062. Pop top camper, electric corner jacks, shower/toilet combo, fridge, stove & sink, air condition, hot water, radio/cd, side & back awnings, outside shower and plenty of storage. Extensive refurbishment conducted in 2025. New LEDs, new Dometic CRX 110 fridge, fit GPO for fridge, replaced GPO at stove, new buffer blocks, new skylight, new smoke detector and gas detectors fitted, new reverse cycle air conditioning, replace bed struts, new mattress and cushions, new11 foot Dometic awning, new power centre WF-8725E, new Rieco Titan 2000lb electric jacks. GST will not be added to knock down price. GST will be added to buyers premium. Located Temora, NSW.
|
REFERRED |
$1500
|
 |
170 |
2005 ENCLOSED BOX TRAILER. ZAIDAN WELDING CE6. ATM: 2500KG. Fully enclosed. Leaf spring suspension. Drum brakes. LED tail lights. Solar panel. 1840mm wide (internal post to post) 1960mm high, 4800mm long. Located Purlewaugh (Coonabarabran), NSW
|
REFERRED |
$2400
|
 |
171 |
Food Van trailer Manufactured 2021 by Victorian Coolrooms VIN: 6T9T20V6GMAA62001. Hardly used with Stainless steel fit out, rear Entry door, serivice window, hot water system, fridge freezer, hand towel dispenser, 3 Tray Bain Marie warmer, overhead exhaust fans x 2, sink, Devanti hot plate, dual deep fryer, 20L oil included, plenty of storage. Generator platform on A-Fram Single axle, under chassis water storage, dual external points for incoming power (can be run off generator Note Generator not included in sale). 4 x grounding stabilising legs handle included, spare tyre, rear access step. Located Warracknabeal, VIC.
|
REFERRED |
$8100
|
 |
172 |
2012 TUZA HORSE FLOAT. 2000kg ATM. Very Clean & Tidy. Original Tyres. Had very little use. Located Dubbo, NSW
|
REFERRED |
$4750
|
 |
173 |
2021 UNIVERSAL LARGE TRADIE TRAILER, VIN: 6U9VSS00000224377 * ATM: 1850 kg * Tare: 1100 kg * Coupling: 50 mm ball with handbrake * Breakaway system * 12V Blackjack trailerl jack + handbrake * ELECTRICAL SETUP – Circuit breaker installed * Two power outlets * Voltmeter * Two Anderson plugs * Strip lights on all lift up doors * Light switches for strip lighting * Two 100Ah deep cycle batteries * STORAGE & CANOPY BUILD – Large tray canopy * Multiple drawers on heavy duty slides * Large toolbox * flat plate slide out * Rear shelving * Full top rack with roller * Front ladder rack * ADDITIONAL EQUIPMENT – Water tank with tap and internal water gauge * Fire extinguisher + fire blanket * Professionally wired setup * As new condition * Measurements – Canopy length: 2.35 m, width: 1.5 m, internal height: 1.35 m, height from ground to top: 2.0 m, Total trailer length: 3.8 m, Total width: 2.1 m * HISTORY -- Professionally fitted out by an auto electrician for air conditioning repair work. Only used twice. Purpose built for air conditioning repair work. Stored in excellent condition. As new – used only twice. GST will not be added to knock down price. GST still added to buyers premium. Located Yarrawonga, VIC.
|
REFERRED |
$7750
|
 |
174 |
2006 VIP BOW RIDER, HIN: VVI06287E506 Fitted with a 3.0 Mercruiser stern drive on a galvanised single axle trailer. Located Yarrawonga, VIC
|
SOLD |
$3700
|
 |
175 |
2000 PRO PUNT PASSENGER BOAT, HIN: AUYWEPP219C000, Made by Yamba Welding & Engineering. 2805.2hrs, 50hp Mercury Big Foot motor, was licenced to carry 25 passengers plus 2 crew members. Includes boarding ramp, depth finder, UHF, chairs, life jackets and all safety gear as seen in photos. Boat is double skinned and fully lockable. Measurements: width 2.85m, length 7.55m and overall length approximately 8.20m. Service since 2016 shown in photos. 2000 Custom Boat Trailer, VIN: 69T22S04Y0UPL003. Electric winch and spare tyre. Electrical on trailer needs attention. Measurements: length 8.6m and width 1.77m. Overall measurements of both assets approximately 9.7m long and 3.03m wide. Both assets unregistered. Located Menindee, NSW.
|
REFERRED |
$12500
|
 |
176 |
Clark 3.3m Cutter aluminium boat. Johnson 15hp 2 stroke outboard motor. Serviced at Mildura Marine Centre. And hasn’t had use since. Included is a single axle gal boat trailer with manual winch. No identifiers sighted on both assets. Located Wilcannia, NSW.
|
REFERRED |
$550
|
 |
177 |
CRF FLAT DECK BOGIE TRAILER. GCM 3.5t, Tare 1.410, 6 m long by 2.4 m wide, 8.1 m pin to rear. Checker plate floor with removable head wall, sides and pins to give flat deck. Four under deck toolboxes. Two aluminium loading ramps located in under deck rear toolbox. Break away coupling, heavy duty wind up leg and handbrake. Roller Rocker suspension. 3.5 t. Low kilometres use, as still on original tyres. Trailer presents in good condition. Currently registered. Located Aleena, NSW.
|
REFERRED |
$14750
|
 |
178 |
2024 DGA WELDING 3.6M TIPPING TANDEM TRAILER. VIN:629TT36TBRY175001. 12v hydraulic unit, 5 stage hydraulic ram, flat steel floor, 6 x tie down point, and rope rail both sides. spilt side boards with removeable latching post, 9 leaf sunrise roller rocker spring suspension, electric brakes, black steel sunraysia rims with 265/70R16LT tyres,presents in new condition, measures tray lengths 3.6m width 2.1m and over all length approx 5.3. Located Young, NSW. More photos to come.
|
REFERRED |
$14500
|
 |
179 |
2011 TYMEYRE 7X4 BOX TRAILER. VIN. 6T8TYMBOXBS000108. Ironbark firewood in the trailer is included in this sale. Unregistered. One tyre with a slight leak. Vendor will pump up prior to delivery. No GST on this sale. GST still on the buyers premium. Located Narrabri, NSW
|
REFERRED |
$450
|
 |
180 |
CUSTOM FUEL TRAILER DIESEL Converted from hydrous ammonia tank capacity approximately 3700l, with auto shut off nozzle, with fuel filter, fuel is transferred thought pressurization of vessel, from a dual custom compressor powered by a Honda petrol engine, 40mm tow eye, drum brakes, Located Tullamore, NSW.
|
SOLD |
$8800
|
 |
181 |
DIGGA 6' SLASHER, Model SL-000170, SN: 2104210041. Hydraulic operation, universal hitch, operating on 327 New Holland skid steer, maximun 20 hrs use. AS New. Located West Wyalong, NSW.
|
REFERRED |
$5750
|
 |
182 |
2019 SEADOO WAKE PRO 230. Supercharged 230hp engine. Trailer VIN. 6H4RE121319006634. Trailer currently registered to February 2027, ski is not. Bluetooth Stereo. 135 hours. Will be supplied with new battery. No gst on this lot, only on the buyers premium. Located Warren, NSW.
|
REFERRED |
$6000
|
 |
183 |
KENWORTH T601 AREO FOIL TOP. Removed from Areo A2 bunk. Located West Wyalong.
|
|
$0
|
 |
184 |
2024 AJC Portable Building (Serial 9495) — a high quality, climate-controlled unit built with 100mm cool room panels. Generous Length 9.2m × Width 3.48m × Height 2.96m footprint. (Note Gutter width not included) Fully fitted with commercial twin stainless sink, PA entry door, dual-swing internal PA door, viewing window, hygiene wash station, ample power points, shelving, hot water system, and reverse cycle air conditioning. Connected to 3 phase power (disconnection will be arranged by the vendor). Includes access ramp, landing platform, and gate. (Pressure pump and 10,500L Rapidplas tank available by negotiation.) Note: purchaser to disassemble ramp and platform and other accessory items. Please note a Crane will be required to lift on to transport. Located Griffith/Yenda, NSW.
|
REFERRED |
$5500
|
 |
185 |
SAUCER BIN. Made by Parkes Steel Products. Clean. 3.5m wide with 3.4m high sides. Located Parkes, NSW
|
|
$0
|
 |
186 |
TIPPER TRUCK GRAIN EXTENSION. 2.4m wide x 4.1m long x 900mm high. Located Parkes, NSW
|
|
$0
|
 |
187 |
GANTRY – 5 TON. 3.5m wide x 3.8m high, fitted with 5-ton endless chain. Located Parkes, NSW
|
REFERRED |
$250
|
 |
188 |
GANTRY – 1 TON. 3.2m wide x 2.8m high, fitted with 1-ton endless chain. Located Parkes, NSW
|
REFERRED |
$100
|
 |
189 |
COLLAPSIBLE BOAT TRAILER. Minimal use. 8-inch wheels. Located Parkes, NSW
|
REFERRED |
$150
|
 |
190 |
JOHN DEERE 8 STUD RIM. Suit 9500/9600 JD header. Located West Wyalong, NSW.
|
REFERRED |
$100
|
 |
191 |
JOHN DEERE 10 STUD RIMS 32 X DW27 x 2. Suit 9400/9500/9600 JD header. Ued condition. Located West Wyalong, NSW.
|
REFERRED |
$350
|
 |
192 |
EDSON 3000 SERIES DRILLING RIG. Serial No. 3011, 1,003 hours since rebuild. Fitted with new hydraulic drive mud pump (Silvan) rated at 22 gpm, New hydraulic head drive motor. Turbo Perkins power pack, approx. 90 HP. Features Rod rotation cage with hydraulic lockout, 2 x winches including heavy and wire-line winch, hydraulic stillsons, 2 x kill switches/E-stops, 4 x hydraulic jack legs and 3 x hydraulic pumps. Main pump rated at approx. 84 L/min. Pull-down capacity approx. 7,500 kg, pull-out capacity approx. 10,000 kg and torque approx. 36,000 lb/in. Located Parkes, NSW
|
REFERRED |
$3000
|
 |
193 |
SUBMERSIBLE BORE PUMP WITH STAR-RITE L90 HF550 PUMP & MOTOR. Includes reel with 110m of new 50mm poly pipe, new stainless-steel 4mm cable and new Sta-Rite pump and motor. Model No. L90 HF550, USA, with control box. Rated at approx. 200 L/min at 60m. Located Parkes, NSW
|
REFERRED |
$250
|
 |
194 |
2 x CASE RIMS 32xDW21TB. Suit 2188 to 2388 Case Header. Used condition. Located West Wyalong, NSW.
|
REFERRED |
$400
|
 |
195 |
Red River Complete Working Cattle Yard Setup, including: Red River loading race, 3.10m long x 0.81m wide x 2.0m high - Red River cattle crush with dual-sided access and head bail - G-Force cattle force yard - 32 panels, each 2.14m long x 1.8m high - Four single gates - One double gate - One large main gate - One small spring-loaded man gate - One race slide gate - Four multi-attachment bars - 25 additional panels of other brand, each 2.1m long x 1.8m high - Sold as a complete full working yard set. Property sold, no further use. Vendor will not separate. Located West Wyalong, NSW.
|
SOLD |
$14000
|
 |
196 |
STOCKPRO X 4 AND CUSTOM X 6 Cattle Feeders. Stored off ground on pipe. Stockpro measurements: L 4.93m x W 1.0mx H 0.65m. Custom measurements: 4 at L 5m x W 1m x H 0.65, 1 at 5.8m x W 1.1 x H 7.70 and one smaller not measured. All feeders have no floor and sold as one lot. Property sold, no further use. Located West Wyalong, NSW.
|
REFERRED |
$3950
|
 |
197 |
HYDRAULIC PLAIN / BARB WIRE ROLLER. On ATV trailer, Can pull up to 1200m. Located Dubbo, NSW
|
REFERRED |
$600
|
 |
198 |
HORSLEY ENGINEERING QUICK ROLL HYDRAULIC WIRE WINDER AND POST PULLER. 1250mm between guides, Located Dubbo, NSW
|
REFERRED |
$2300
|
 |
199 |
HORSLEY ENGINEERING HYDRAULIC WIRE WINDER / FENCE ROLLER. Will be Located Dubbo, NSW
|
REFERRED |
$1400
|
 |
200 |
40ft Container 4 Side Opening Doors on one side
Comes with CSC Plate, LYPU0251957, EXEQ Stock No179939 Located Dubbo NSW
|
SOLD |
$9500
|
 |
201 |
40ft Container, 2 Large side doors on one side
Doors Dimensions: Approximately 4m Wide x 2.5m High
comes with CSC plate, LYPU0251031, EXEQ Stock No 179887 Located Dubbo NSW
|
SOLD |
$10500
|
 |
202 |
40ft High Cube Container, 2 Side Opening Doors, 2 Large side doors on one side
Doors Dimensions: Approximately 4m Wide x 2.5m High
comes with CSC plate
Container No: LYPU0250930 - With Fork Pockets EXEQ Stock No 179944 Located Shepparton Vic
|
SOLD |
$8600
|
 |
203 |
Portable Fold Out House, Model: L0206 (Ensuite)Includes:
8 Sliding lockable Double Glazed Windows,1 x Door, Timber look flooring Gas struts & winches for easy assembly Size when opened out: 19ft x 20ft
Adjustable feet for easy levelling Unit is folded up and ready for transport Approximate Shipping Dimensions: 5950mm L x 2200mm W x 2515mm H
Approximate Weight: 3945kg Ensuite fitted with: Shower, Toilet, Sink, Mirror, Lockable door, Hot & Coldwater inlets, 2 waste outlets, Exhaust fan vent
WELS Information:
Toilet:
WELS Registration Number: L08231,
Efficiency Star Rating 4,
Water Consumption Full Flush 4.3 L / Half Flush 2.8 L,
Nominal Average Flush: 3.5L
Bathroom Tap Equipment:
WELS Registration Number: T38665,
Water Efficiency Star rating: 5,
Water Consumption 6L/min, ** Note: Photos to be used as a guide only – Unit does not come wired – customer must engage a licensed electrician to supply & install all wiring & components to Australian Standards – this includes switches, Lights & sockets
** Note: Unit does not come with the furniture.
** Note: Units are not suitable to be transported on Skel Trailers / Side loaders – These units are smaller than a Standard Shipping Container, so container pins cannot be used for load restraint during transport.
EXEQ Stock No 175965 Located Shepparton Vic
|
REFERRED |
$7000
|
 |
204 |
Unused Expandable Container House with Ensuite, Model: L0206, Includes: 8 Sliding lockable Windows, 1 x Door, Timber look flooring, Ensuite fitted with Shower, Toilet, Sink, Mirror, lockable door,Hot & Cold-water inlets, 2 waste outlets,Exhaust fan vent, Gas struts & winches for easy assembly, Size when opened out: 19ft x 20ft, Adjustable feet for easy levelling, Unit is folded up and ready for transport, Toilet, WELS Registration Number: L07047, Efficiency Star Rating 4, Water Consumption Full Flush 4.5 L / Half Flush 3.1 L, Nominal Average Flush: 3.4L, Bathroom Tap Equipment, WELS Registration Number: T38665, Water Efficiency Star rating: 5, Water Consumption 6L/min, Shower:, WELS Registration Number: S17370, Water Consumption Highest – 9L/min, Water Efficiency Star rating at Highest nominal Flow: 3, Water Consumption Lowest – 6L/min, Water Efficiency Star rating at Lowest nominal Flow: 5, Approximate Shipping Dimensions: 5950mm L x 2200mm W x 2515mm H, Approximate Weight: 3945kg, Number: 167934. Not supplied with Warranty* Located Dubbo, NSW
|
REFERRED |
$10250
|
 |
205 |
Portable Foldout House
Model: L0207
Includes:
8 Sliding lockable Windows
1 x Door
Timber look flooring
Gas Struts & winches for easy assembly
Size when opened out: 15ft x 20ft
Adjustable feet for easy levelling
Unit is folded up ready for Transport
Approximate Shipping Dimensions:
5.85m Long x 750mm Wide x 2.5m High
Approximate Weight: 2650Kgs
** Note: Photos to be used as a guide only – Unit does not come wired – customer must engage a licensed electrician to supply & install all wiring & components to Australian Standards – this includes switches, Lights & sockets
** Note: Units are not suitable to be transported on Skel Trailers / Side loaders – These units are smaller than a Standard Shipping Container, so container pins cannot be used for load restraint during transport. EXEQ Stock No 180151 Located Shepparton VIC
|
REFERRED |
$3000
|
 |
206 |
Portable Foldout House
Model: L0207
Includes:
8 Sliding lockable Windows
1 x Door
Timber look flooring
Gas Struts & winches for easy assembly
Size when opened out: 15ft x 20ft
Adjustable feet for easy levelling
Unit is folded up ready for Transport
Approximate Shipping Dimensions:
5.85m Long x 750mm Wide x 2.5m High
Approximate Weight: 2650Kgs
** Note: Photos to be used as a guide only – Unit does not come wired – customer must engage a licensed electrician to supply & install all wiring & components to Australian Standards – this includes switches, Lights & sockets
** Note: Units are not suitable to be transported on Skel Trailers / Side loaders – These units are smaller than a Standard Shipping Container, so container pins cannot be used for load restraint during transport EXEQ Stock No 179141 Located Dubbo NSW
|
REFERRED |
$5800
|
 |
207 |
Unused Tracked Mini Loader
Model: S382T
Comes with:
1125mm GP Bucket
Rubber Tracks
23HP Engine
Piped for auxiliaries
Battery isolator
Operating Weight: 920Kgs
Hydraulic Oil Flow Rate: 43L/min
Approximate Shipping Dimensions:
2300mm L x 1200mm wide x 1300mm High EXEQ Stock No 178809 Located Dubbo NSW
|
SOLD |
$5000
|
 |
208 |
Unused 1.5 Ton Mini Excavator
Model: S15Pro
Comes with:
360mm GP Bucket
Piped for Auxiliary
Rubber Tracks
930mm Levelling Blade
Diesel Engine
Operating weight: 1500Kgs
Hydraulic Oil Flow Rate: 18L/min
Shipping Dimensions: 2800mm L x 950mm W x
2200mm H EXEQ Stock No 178836 Located Dubbo NSW
|
SOLD |
$6400
|
 |
209 |
Model: DD500
Comes with:
12V Pump – 40 l/m Flow
4m hose and automatic shut off nozzle
Lockable lid
Weight: 58Kgs
Dimensions: 1740mm x 800mm x 760mm Located Dubbo NSW
|
SOLD |
$850
|
 |
210 |
Model: DD400
Comes with: 12V Pump – 40 l/m Flow
4m hose and automatic shut off Nozzle
Lockable lid
Shipping Dimensions: 1150mm L x 800mm W x 680mm H
Weight: 53kg
Fork Pockets Located Dubbo NSW
|
SOLD |
$800
|
 |
211 |
Model: DD100N
Comes with: 12V Pump – 40 l/m Flow
hose and automatic shut off Nozzle
Approximate Shipping Dimensions: 800mm L x 530mm W x 510mm H
Approximate Weight: 14kg EXEQ Stock No S18809 Located Dubbo NSW
|
SOLD |
$300
|
 |
212 |
Unused 75L Portable Fuel Tank with 12V DC Pump
Model: DD7801
40 lpm
4m of ¾ inch Delivery Hose
Shipping Dimensions: 525mm x 425mm x 1015mm
Weight: 15kg EXEQ Stock S18919 Located Dubbo NSW
|
SOLD |
$200
|
 |
213 |
Unused 75L Portable Fuel Tank with Manual Pump
Model: GM7801
Maximum Flow: 20 lpm
2m of ¾ inch Delivery Hose
Shipping Dimensions: 525mm x 425mm x 1015mm
Weight: 15kg EXEQ Stock No S18897 Located Dubbo NSW
|
SOLD |
$300
|
 |
214 |
Unused 240V Fuel Transfer Pump with meter
Model: GP60A
56 LPM
2m of Suction Hose
4m of Delivery Hose
Shipping Dimensions:420mm Long x 350mm Wide x 350mm High
Approximate Weight: 20Kg EXEQ Stock No S18994 Located Dubbo NSW
|
SOLD |
$250
|
 |
215 |
Unused 12V Fuel Transfer Pump with meter
Model: GP40A
40 LPM
2m of Suction Hose
4m of Delivery Hose
Shipping Dimensions: 420mm Long x 350mm Wide x 350mm High
Approximate Weight: 20Kg EXEQ Stock No S18970 Located Dubbo NSW
|
SOLD |
$400
|
 |
216 |
2 x
Tubeless
Pattern: E3E,
PR: 24,
To suit 17 inch rim
Each Tyre approximate Shipping Dimensions: 1490mm Diameter x 520mm Wide
Weight: 150kg
EXEQ Stock No S19672, S19673 Located Dubbo NSW
|
REFERRED |
$700
|
 |
217 |
Unused Silenced 15kVA Single Phase Generator
Model: EXEQ15-1
4 Cylinder Diesel Engine
Single Phase
Emergency Stop
Battery Isolator
Lifting point,
Sound Insulation
Comes with Manual
Approximate Shipping Dimensions: 1850mm L x 740mm W x 1150mm H
Approximate Weight: 655kg
NOTE: 2 Wire Start Compatible (Remote Start) Set up Instructions can be provided upon request, Single Phase, Serial No: 26050149 *Tricon Tested 14/08/26* EXEQ Stock No 176630 Located Shepparton Vic
|
REFERRED |
$2000
|
 |
218 |
Unused Silenced 15kva Diesel Generator
Model: EXEQ15-3
Cylinder Diesel Engine
Single & 3 Phase Outlets
Emergency Stop
Battery Isolator
Lifting point
Sound Insulation
Comes with Manual
Approximate Shipping Dimensions: 1850mm L x 740mm W x 1100mm H
Approximate Weight: 640kg
NOTE: 2 Wire Start Compatible (Remote Start) Set up Instructions can be provided upon request Serial No: 26050165 *Tricon Tested 30/07/26* EXEQ Stock No 176646 Located Shepparton Vic
|
SOLD |
$4200
|
 |
219 |
,Unused 25kva Silenced Diesel Generator
Model: EXEQ25-3
4 Cylinder Diesel Engine
Single & 3 Phase Outlets
Emergency Stop
Battery Isolator
Fork Pockets
Lifting point
Sound Insulation
Comes with Manual
Dimensions: 1850mm x 740mm x 1200mm
Weights: 685kg
NOTE: 2 Wire Start Compatible (Remote Start) Set up Instructions can be provided upon request
Serial No: 26050207 * Tricon Tested 30/07/26* EXEQ Stock No 176688 Located Shepparton Vic
|
SOLD |
$6300
|
 |
220 |
Unused 25kva Single Phase Generator
Model: EXEQ25-1
4 Cylinder Diesel Engine
Outlets: 4 x 32Amp & 4 x 15Amp
Emergency Stop, Battery Isolator
Fork Pockets
Lifting point
Sound Insulation
Comes with Manual
Approximate Shipping Dimensions: 1950mm L x 740mm W x 1200mm H
Approximate Weight 810Kgs
NOTE: 2 Wire Start Compatible (Remote Start) Set up Instructions can be provided upon reques Serial No: 26050186 *Tricon Tested 14/08/26* EXEQ Stock No 176667 Located Shepparton Vic
|
SOLD |
$4600
|
 |
221 |
Unused 10000 Litre Self Bunded Fuel Storage Tank
Model: PS11
Safe Fill: 10000 Litres
Comes with:
Electric Pump
Galvanized Grated Bunded front Compartment with drain
DN50 (2”) Flanged 150# Fill Point with Full Bore Ball Valve
Non Return Valve
Male Camlock Fitting
Dust Cap
Mechanical Overfill Protection Valve
12V Overfill Alarm
DN50 (2”) Flanged 150# Suction Point with Anti Syphon
Foot Valve Assembly
Fork Pockets
TARE: 3100kg
Approximate Shipping Dimensions: 2950mm L x 2240mm W x 2520mm H
NOTE: This tank is constructed to AS1692-2006 & AS1940-2017
To be installed & maintained in accordance with AS1940
Tank is suitable for combustible Liquid Serial No: INCU110091 EXEQ Stock No 178632 Located Shepparton Vic
|
SOLD |
$15750
|
 |
222 |
Unused 4500 Litre Bunded Fuel Storage Cube / Tank with Solar Powered Pump
Model: G4.5
Comes with: Solar Panels, Hose, Nozzle , Pump & Meter
Safe Fill: 4500 Litres
Fork Pockets
Galvanized Lifting Lugs
TARE: 1512kg
Approximate Dimensions: 2926mm L x 2198mm W x 1280mm H Serial No: 00450221
EXEQ Stock No 178637 Located Shepparton Vic
|
REFERRED |
$6000
|
 |
223 |
LINCOLN JETMIG 195. Vendor states working condition. Surplus to needs, Located Dubbo, NSW
|
REFERRED |
$300
|